Welcome to CompositeGPT™ Marine & Industrial Procurement Copilot
Trained on 3,250+ normalized ASTM / ISO Technical Data Sheets and connected to real-time inventory feeds across US stocking distributors (Composites One, FGCI, Revchem, Express Composites).
We're infusing a 38ft center console hull in Tampa, FL. Our usual Derakane 510A vinyl ester is on a 3-week factory backorder. We need an immediate domestic substitute with viscosity < 200 cP and HDT > 215°F that won't print-through on marine gelcoat.
Analysis of Target Formulation & Infusion Kinetics:
Derakane 510A is a brominated epoxy-based vinyl ester resin. For high-speed commercial boat infusion where MIL-Spec brominated flame spread isn't mandated, you need a high-elongation Bisphenol-A vinyl ester with ultra-low peak exotherm to prevent post-cure print-through on ISO/NPG marine gelcoats.
ASTM D648 (HDT), D2196 (Viscosity) & D638 Cross-Check
| Property / Parameter | Target Baseline | CompositeGPT™ Specification | Status |
|---|---|---|---|
| Resin Chemistry | Brominated Vinyl Ester | Bis-A Epoxy Vinyl Ester (CoREZYN CORVE8100) | 98% Compatible |
| Brookfield Viscosity @ 77°F | 250 cP | 175 cP (Superior Darcy flow for 38ft hull) | Exceeds Spec |
| Heat Deflection (ASTM D648) | 220°F / 104°C | 221°F / 105°C | Exact Match |
| Tensile Elongation (ASTM D638) | 4.0% | 4.8% (Ductile, slamming impact resistant) | +20% Ductility |
Engineering Volume Note: For a 38ft center console hull (~460 sq ft wet surface area) at 40% VIP vacuum infusion resin weight fraction, you require 1,800 lbs of resin = 4 × 55-Gallon Drums (Full Pallet).
Live Stock Verification: Composites One (Lakeland, FL Hub) holds 42 drums of CoREZYN CORVE8100 in stock (45 mins from Tampa). FGCI (St. Petersburg, FL) holds 24 drums ready for same-day DOT Class 3 Hazmat dispatch.Open /suppliers/fgci →
Autonomous RFQ Dispatch to FGCI (St. Petersburg, FL) & Composites One (Lakeland, FL)Stripe Connect + Hazmat Routing
Recommended Material
Interplastic CoREZYN® CORVE8100 Infusion Vinyl Ester
Order Volume
4 × 55-Gal Drums (1,800 lbs — Full Pallet)
Shipyard ZIP & City
33602, Tampa, FL
Buyer Account
SeaCraft Boatworks LLC
Powered by CompositeGPT™ & Normalized ASTM D638 / D648 Knowledge GraphDirect US Warehouse Hazmat Fulfillment • 4-Hour SLA