# CompositeMatrix™ (https://compositematrix.com)
> The North American B2B Composite Materials Intelligence Platform, Normalized ASTM Engineering Registry (152 SKUs across 9 Industrial Categories), Stoichiometric Cure & Drop-In Equivalence Engine, US DOT 49 CFR Hazmat Logistics Matrix, and Autonomous AI Procurement Copilot.

## AI Agent, LLM RAG & Open Dataset Endpoints
- Full Markdown ASTM Corpus (llms-full.txt): https://compositematrix.com/llms-full.txt
- Open ASTM Composite Benchmark Dataset (Schema.org/Dataset): https://compositematrix.com/benchmarks/astm-composites
- 9 Industrial Category Hubs: https://compositematrix.com/categories
- Head-to-Head ASTM Comparison Engine: https://compositematrix.com/compare
- Anthropic MCP Server (JSON-RPC 2.0): https://compositematrix.com/api/mcp
- OpenAI GPT Actions OpenAPI 3.1 Spec: https://compositematrix.com/api/v1/openapi.json
- REST ASTM Search & Cross-Reference API: https://compositematrix.com/api/v1/materials
- Interactive CompositeGPT™ RFQ Copilot: https://compositematrix.com/copilot

## 9 Industrial Composite Material Categories (9 Hubs)
- [Marine & Novolac Vinyl Ester Resins (CAT-RES-VE)](https://compositematrix.com/categories/vinyl-ester-resins): Bisphenol-A and Epoxy Novolac Vinyl Ester thermoset matrices engineered for high hydrolysis resistance, blister prevention below the waterline, and high-temperature chemical storage. | Cure & Process Rule: MANDATORY CURE SYSTEM: Requires 1.25% to 2.0% MEKP (UN3105) or Cumene Hydroperoxide (CHP) for low-exotherm thick laminates. Never mix Cobalt promoter directly with MEKP. | Substitutes: Bisphenol-A VE group: Interplastic CoREZYN CORVE8100 ↔ INEOS Derakane 411-350 ↔ AOC Vipel F085 ↔ Polynt Reichhold Dion 9100. Novolac high-HDT group: Derakane Signia 470-300 ↔ AOC Vipel F010-SER. | DOT Hazmat: DOT Class 3 Flammable Liquid (UN1866, PG II/III)
- [Structural Infusion & Laminating Epoxy Systems (CAT-RES-EPX)](https://compositematrix.com/categories/structural-infusion-epoxies): Low-viscosity Bisphenol-A/F and cycloaliphatic epoxy systems delivering ultra-low cure shrinkage (<1.5%), superior fatigue life with carbon fiber, and DNV-GL / Lloyd's certification. | Cure & Process Rule: STOICHIOMETRIC RATIO CRITICAL: Must be weighed strictly at manufacturer mix ratio (e.g., 100:28 or 100:34 by weight) with matched Amine Hardener. Requires post-cure at 60–80°C for full Tg. | Substitutes: DNV-GL Infusion group: Gurit Prime 37 ↔ Hexion EPIKOTE MGS RIMR 135 ↔ Huntsman Araldite LY 1564 / Aradur 22962 ↔ Sicomin SR 8100. Marine Wet-Layup group: West System 105 ↔ PRO-SET LAM-125. | DOT Hazmat: DOT Class 9 Environmentally Hazardous (UN3082)
- [Isophthalic & DCPD Marine Polyester Resins (CAT-RES-UPR)](https://compositematrix.com/categories/marine-isophthalic-polyesters): High-volume structural Isophthalic and low-print DCPD unsaturated polyester resins for production boatbuilding, decks, superstructures, and industrial fiberglass molding. | Cure & Process Rule: Catalyze with 1.25%–2.0% MEKP (UN3105) at 25°C shop ambient temperature. Compatible with styrene monomer Wax Solution (Mod C) for topcoat air-dry cure. | Substitutes: Interplastic CoREZYN Iso-DCPD ↔ Polynt Stypol 040-8086 ↔ AOC Synolite 8388-N-1. | DOT Hazmat: DOT Class 3 Flammable Liquid (UN1866)
- [MEKP Peroxide Initiators, Amine Hardeners & Cure Promoters (CAT-CHEM-CAT)](https://compositematrix.com/categories/catalysts-curatives-hardeners): Essential chemical initiators, organic peroxides, and stoichiometric amine hardeners required to cross-link Vinyl Ester, Polyester, and Epoxy resin matrices. | Cure & Process Rule: HAZMAT SEGREGATION RULE: Organic Peroxides (Class 5.2 UN3105) must be shipped and stored in isolated cabinets away from Cobalt/Amine promoters to prevent self-accelerating decomposition. | Substitutes: Standard MEKP group: United Initiators Norox MEKP-925H (Low-Hydrogen Peroxide for Vinyl Ester) ↔ Nouryon Cadox L-50a ↔ Arkema Luperox DDM-9. Low-exotherm group: Norox CHP (Cumene Hydroperoxide). | DOT Hazmat: DOT Class 5.2 Organic Peroxide (UN3105) / Class 8 Corrosive Amine (UN2735)
- [Carbon Fiber Fabrics (3K / 6K / 12K), Spread-Tow & Prepregs (CAT-FAB-CF)](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs): High-modulus PAN-based woven 2x2 twill, plain weave, non-crimp biaxial, and unidirectional carbon reinforcements for aerospace, defense, motorsport, and racing yachts. | Cure & Process Rule: SIZE COMPATIBILITY: Use Epoxy-compatible silane sizing with Structural Epoxy Resins (approx. 55:45 fiber-to-resin weight ratio in vacuum infusion). ITAR/EAR export screening applies. | Substitutes: 3K 200 gsm group: Hexcel HexForce 282 3K ↔ Chomarat C-WEAVE 200T 3K ↔ Toray T300 3K Twill. 12K High-Strength UD/Biax group: Toray Torayca T700S 12K ↔ Teijin Tenax E HTA40 ↔ Vectorply C-BX 1200. | DOT Hazmat: Non-Regulated (Subject to US BIS EAR ECCN 1C010 / 1C210)
- [E-Glass / E-CR Stitched Multiaxials (1708 / 1808) & Kevlar Hybrids (CAT-FAB-GLS)](https://compositematrix.com/categories/e-glass-multiaxial-aramid): Corrosion-resistant boron-free Advantex E-CR glass and stitched biaxial/quadraxial fabrics engineered for rapid wet-out in marine hulls, stringers, and corrosion tanks. | Cure & Process Rule: RESIN DEMAND FORMULA: 1708 Biaxial (25.5 oz/yd² total) absorbs ~0.95 kg of Vinyl Ester resin per m² per ply in hand layup, or ~0.68 kg/m² per ply under vacuum infusion. | Substitutes: 1708 Biaxial group: Vectorply E-BXM 1708 ↔ Owens Corning Knytex DBM 1708 ↔ Saertex U-E-868g. Quadraxial group: Vectorply E-QX 2400 ↔ Chomarat Rovicore. | DOT Hazmat: Non-Regulated Industrial Reinforcement
- [Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) (CAT-CORE-SW)](https://compositematrix.com/categories/structural-sandwich-cores): Closed-cell cross-linked PVC, high-elongation SAN polymer foams, recyclable PET cores, and kiln-dried end-grain balsa engineered to maximize flexural stiffness-to-weight ratio. | Cure & Process Rule: CORE BEDDING & RESIN UPTAKE: Grid-scored (GS) or grooved/perforated (GP) sheets require ~0.55 kg/m² extra resin for kerf/groove filling or a dedicated structural core-bonding putty. | Substitutes: 80–100 kg/m³ Marine Foam group: Diab Divinycell H80 / H100 ↔ Gurit Corecell M80 / M100 (SAN) ↔ 3A Composites Airex C70.75 / T92 PET. High-Compression Transom group: 3A Baltek SB.100 Balsa ↔ Coosa Bluewater 26. | DOT Hazmat: Non-Regulated Structural Core
- [Marine ISO/NPG Gelcoats, Structural Bonding Pastes & Mold Releases (CAT-GEL-ADH)](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling): UV-stabilized ISO/NPG marine gelcoats, vinyl ester barrier coats, methacrylate structural adhesives (Plexus), core-bonding putties, and semi-permanent mold release systems. | Cure & Process Rule: GELCOAT THICKNESS & CURE: Spray at 18–22 mils (450–550 microns) wet film thickness using 1.8% low-water MEKP. Must reach tack-free cure before applying skin-coat laminate. | Substitutes: Marine ISO/NPG Gelcoat group: HK Research MaxGuard NP ↔ Polynt CCP Armorcote ↔ Interplastic Silmar. Structural Methacrylate Adhesive group: ITW Plexus MA530 / MA590 ↔ Scott Bader Crestabond M1-20. | DOT Hazmat: DOT Class 3 Flammable Liquid (UN1866 / UN1133)
- [Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes (CAT-VAC-CON)](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables): Process consumables engineered for leak-free vacuum bagging, autoclave prepreg curing up to 204°C, and controlled resin wave progression during VIP/VARTM. | Cure & Process Rule: COMPLETE INFUSION STACK: Laminate → Peel Ply (85 gsm Nylon) → Perforated Release Film → HDPE Spiral Flow Media → Spiral Tubing & Omega Channels → Butyl Tacky Tape → Nylon Vacuum Film. | Substitutes: Vacuum Bagging Film group: Airtech Wrightlon 5400 / 7400 ↔ Diatex VacPak NBF-540 ↔ Richmond Aerovac. Sealant Tape group: Airtech GS-213-3 ↔ General Sealants GS#43MR. | DOT Hazmat: Non-Regulated Process Consumables

## Verified US Distributor Storefronts
- [Composites One (National Tier-1 Master Distributor)](https://compositematrix.com/suppliers/composites-one): North America's Largest Composite Materials Distribution Network & Cold-Storage Terminal Operator | Regional US Hubs: Lakeland (Southeast Master Hub), FL, Rock Hill (Carolinas Marine & Aero Hub), SC, Houston (Gulf Chemical Corridor Hub), TX, Elkhart (Midwest Pultrusion & Marine Hub), IN
- [Express Composites (Midwest & Great Lakes Hub)](https://compositematrix.com/suppliers/express-composites): Dedicated Composite Supply Partner for Great Lakes Boatbuilders, Wind Repair & Industrial Pultruders | Regional US Hubs: Minneapolis, MN, Chicago Logistics Terminal, IL
- [FGCI — Fiberglass Coatings Inc. (Florida & Gulf Marine Hub)](https://compositematrix.com/suppliers/fgci): Florida's #1 Stocking Distributor of Marine Resins, Gelcoats, Divinycell Foam & Balsa Cores | Regional US Hubs: St. Petersburg (Tampa Bay Hub), FL, Fort Lauderdale (South FL Yacht Hub), FL, Mobile / Gulf Coast Terminal, AL
- [Revchem Composites (West Coast & Pacific NW Hub)](https://compositematrix.com/suppliers/revchem): Premier West Coast Distributor for Marine Shipyards, Aerospace & Advanced Carbon Fabricators | Regional US Hubs: Santa Fe Springs (Los Angeles), CA, Tacoma (Puget Sound Marine Hub), WA, Phoenix, AZ

## Head-to-Head ASTM Drop-In Comparison Pages (362 Canonical Pairs)
- [3A Composites Airex C70.75 Cross-Linked PVC Sandwich Core vs. Diab Divinycell H100 Structural PVC Core](https://compositematrix.com/compare/3a-composites-airex-c70-75-cross-linked-pvc-sandwich-core-vs-diab-divinycell-h100-structural-pvc-core): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Diab Group
- [3A Composites Airex C70.75 Cross-Linked PVC Sandwich Core vs. Diab Divinycell H45 Light Weight Marine PVC Core](https://compositematrix.com/compare/3a-composites-airex-c70-75-cross-linked-pvc-sandwich-core-vs-diab-divinycell-h45-light-weight-marine-pvc-core): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Diab Group
- [3A Composites Airex C70.75 Cross-Linked PVC Sandwich Core vs. Diab Divinycell H60 Medium Density Sandwich PVC Core](https://compositematrix.com/compare/3a-composites-airex-c70-75-cross-linked-pvc-sandwich-core-vs-diab-divinycell-h60-medium-density-sandwich-pvc-core): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Diab Group
- [3A Composites Airex C70.75 Cross-Linked PVC Sandwich Core vs. Divinycell® H80 Structural PVC Foam](https://compositematrix.com/compare/3a-composites-airex-c70-75-cross-linked-pvc-sandwich-core-vs-divinycell-h80): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Diab Group
- [3A Composites Airex C70.75 Cross-Linked PVC Sandwich Core vs. Corecell™ M80 Marine SAN Foam Core](https://compositematrix.com/compare/3a-composites-airex-c70-75-cross-linked-pvc-sandwich-core-vs-gurit-corecell-m80): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Gurit
- [3A Composites Airex T92.100 Structural PET Foam Core vs. Baltek® SB.100 End-Grain Balsa](https://compositematrix.com/compare/3a-composites-airex-t92-100-structural-pet-foam-core-vs-baltek-sb100): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. 3A Composites
- [3A Composites Airex T92.100 Structural PET Foam Core vs. Coosa Composites Bluewater 26 High-Density Urethane Transom Board](https://compositematrix.com/compare/3a-composites-airex-t92-100-structural-pet-foam-core-vs-coosa-composites-bluewater-26-high-density-urethane-transom-board): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Coosa Composites (Pelham, AL)
- [3A Composites Airex T92.100 Structural PET Foam Core vs. Diab Divinycell HT90 Aerospace Prepreg Cure PVC Core](https://compositematrix.com/compare/3a-composites-airex-t92-100-structural-pet-foam-core-vs-diab-divinycell-ht90-aerospace-prepreg-cure-pvc-core): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Diab Group
- [3A Composites Airex T92.100 Structural PET Foam Core vs. Gurit Kerdyn Green 115 Recyclable Structural PET Core](https://compositematrix.com/compare/3a-composites-airex-t92-100-structural-pet-foam-core-vs-gurit-kerdyn-green-115-recyclable-structural-pet-core): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Gurit
- [3A Composites Baltek SB.100 Structural End-Grain Balsa Core vs. Baltek® SB.100 End-Grain Balsa](https://compositematrix.com/compare/3a-composites-baltek-sb-100-structural-end-grain-balsa-core-vs-baltek-sb100): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. 3A Composites
- [3A Composites Baltek SB.100 Structural End-Grain Balsa Core vs. Divinycell® H80 Structural PVC Foam](https://compositematrix.com/compare/3a-composites-baltek-sb-100-structural-end-grain-balsa-core-vs-divinycell-h80): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Diab Group
- [3A Composites Baltek SB.100 Structural End-Grain Balsa Core vs. Corecell™ M80 Marine SAN Foam Core](https://compositematrix.com/compare/3a-composites-baltek-sb-100-structural-end-grain-balsa-core-vs-gurit-corecell-m80): Category Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) | 3A Composites vs. Gurit
- [3M Scotch-Weld DP420 Toughened Two-Part Epoxy Adhesive vs. HK Research MaxGuard NP White Marine ISO/NPG Gelcoat](https://compositematrix.com/compare/3m-scotch-weld-dp420-toughened-two-part-epoxy-adhesive-vs-hk-research-maxguard-np-white-marine-iso-npg-gelcoat): Category Marine ISO/NPG Gelcoats, Structural Bonding Pastes & Mold Releases | 3M Industrial Adhesives vs. HK Research Corp
- [3M Scotch-Weld DP420 Toughened Two-Part Epoxy Adhesive vs. ITW Plexus MA310 Structural Methacrylate Adhesive](https://compositematrix.com/compare/3m-scotch-weld-dp420-toughened-two-part-epoxy-adhesive-vs-itw-plexus-ma310-structural-methacrylate-adhesive): Category Marine ISO/NPG Gelcoats, Structural Bonding Pastes & Mold Releases | 3M Industrial Adhesives vs. ITW Performance Polymers
- [3M Scotch-Weld DP420 Toughened Two-Part Epoxy Adhesive vs. ITW Plexus MA530 Toughened Structural Methacrylate Adhesive](https://compositematrix.com/compare/3m-scotch-weld-dp420-toughened-two-part-epoxy-adhesive-vs-itw-plexus-ma530-toughened-structural-methacrylate-adhesive): Category Marine ISO/NPG Gelcoats, Structural Bonding Pastes & Mold Releases | 3M Industrial Adhesives vs. ITW Performance Polymers
- [3M Scotch-Weld DP460 High-Peel Carbon Bonding Epoxy vs. HK Research MaxGuard NP White Marine ISO/NPG Gelcoat](https://compositematrix.com/compare/3m-scotch-weld-dp460-high-peel-carbon-bonding-epoxy-vs-hk-research-maxguard-np-white-marine-iso-npg-gelcoat): Category Marine ISO/NPG Gelcoats, Structural Bonding Pastes & Mold Releases | 3M Industrial Adhesives vs. HK Research Corp
- [3M Scotch-Weld DP460 High-Peel Carbon Bonding Epoxy vs. ITW Plexus MA310 Structural Methacrylate Adhesive](https://compositematrix.com/compare/3m-scotch-weld-dp460-high-peel-carbon-bonding-epoxy-vs-itw-plexus-ma310-structural-methacrylate-adhesive): Category Marine ISO/NPG Gelcoats, Structural Bonding Pastes & Mold Releases | 3M Industrial Adhesives vs. ITW Performance Polymers
- [3M Scotch-Weld DP460 High-Peel Carbon Bonding Epoxy vs. ITW Plexus MA530 Toughened Structural Methacrylate Adhesive](https://compositematrix.com/compare/3m-scotch-weld-dp460-high-peel-carbon-bonding-epoxy-vs-itw-plexus-ma530-toughened-structural-methacrylate-adhesive): Category Marine ISO/NPG Gelcoats, Structural Bonding Pastes & Mold Releases | 3M Industrial Adhesives vs. ITW Performance Polymers
- [3M Scotch-Weld DP460 High-Peel Carbon Bonding Epoxy vs. PRO-SET ADV-176 / ADV-276 Toughened Thixotropic Epoxy Paste](https://compositematrix.com/compare/3m-scotch-weld-dp460-high-peel-carbon-bonding-epoxy-vs-pro-set-adv-176-adv-276-toughened-thixotropic-epoxy-paste): Category Marine ISO/NPG Gelcoats, Structural Bonding Pastes & Mold Releases | 3M Industrial Adhesives vs. Gougeon Brothers (PRO-SET)
- [Advantex® Corrosion-Resistant Direct Roving vs. AGY S-2 Glass High-Strength Ballistic & Aerospace Roving](https://compositematrix.com/compare/advantex-ecr-roving-vs-agy-s-2-glass-high-strength-ballistic-aerospace-roving): Category E-Glass / E-CR Stitched Multiaxials (1708 / 1808) & Kevlar Hybrids | Owens Corning vs. AGY Holding Corp (Aiken, SC)
- [Advantex® Corrosion-Resistant Direct Roving vs. Owens Corning Knytex DBM 1708 Advantex E-CR Biaxial](https://compositematrix.com/compare/advantex-ecr-roving-vs-owens-corning-knytex-dbm-1708-advantex-e-cr-biaxial): Category E-Glass / E-CR Stitched Multiaxials (1708 / 1808) & Kevlar Hybrids | Owens Corning vs. Owens Corning
- [Advantex® Corrosion-Resistant Direct Roving vs. Vectorply® E-BXM 1708 Biaxial E-Glass](https://compositematrix.com/compare/advantex-ecr-roving-vs-vectorply-e-bxm-1708): Category E-Glass / E-CR Stitched Multiaxials (1708 / 1808) & Kevlar Hybrids | Owens Corning vs. Vectorply Corp
- [AGY S-2 Glass High-Strength Ballistic & Aerospace Roving vs. Owens Corning Knytex DBM 1708 Advantex E-CR Biaxial](https://compositematrix.com/compare/agy-s-2-glass-high-strength-ballistic-aerospace-roving-vs-owens-corning-knytex-dbm-1708-advantex-e-cr-biaxial): Category E-Glass / E-CR Stitched Multiaxials (1708 / 1808) & Kevlar Hybrids | AGY Holding Corp (Aiken, SC) vs. Owens Corning
- [AGY S-2 Glass High-Strength Ballistic & Aerospace Roving vs. Vectorply® E-BXM 1708 Biaxial E-Glass](https://compositematrix.com/compare/agy-s-2-glass-high-strength-ballistic-aerospace-roving-vs-vectorply-e-bxm-1708): Category E-Glass / E-CR Stitched Multiaxials (1708 / 1808) & Kevlar Hybrids | AGY Holding Corp (Aiken, SC) vs. Vectorply Corp
- [Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder vs. Airtech Greenflow 75 High-Speed Extruded Resin Flow Media](https://compositematrix.com/compare/airtech-airweave-n10-non-woven-polyester-breather-bleeder-vs-airtech-greenflow-75-high-speed-extruded-resin-flow-media): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder vs. Airtech GS-213-3 High-Tack Vacuum Bag Sealant Tape (Tacky Tape)](https://compositematrix.com/compare/airtech-airweave-n10-non-woven-polyester-breather-bleeder-vs-airtech-gs-213-3-high-tack-vacuum-bag-sealant-tape-tacky-tape): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-airweave-n10-non-woven-polyester-breather-bleeder-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech AT-200Y Economical Ambient Infusion Sealant Tape vs. Airtech Greenflow 75 High-Speed Extruded Resin Flow Media](https://compositematrix.com/compare/airtech-at-200y-economical-ambient-infusion-sealant-tape-vs-airtech-greenflow-75-high-speed-extruded-resin-flow-media): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech AT-200Y Economical Ambient Infusion Sealant Tape vs. Airtech Resinflow 90 Heavy-Duty Hull Infusion Distribution Mesh](https://compositematrix.com/compare/airtech-at-200y-economical-ambient-infusion-sealant-tape-vs-airtech-resinflow-90-heavy-duty-hull-infusion-distribution-mesh): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech AT-200Y Economical Ambient Infusion Sealant Tape vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-at-200y-economical-ambient-infusion-sealant-tape-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech Dahlpac MC79 Combined Peel Ply + Release Film + Flow Mesh vs. Airtech Greenflow 75 High-Speed Extruded Resin Flow Media](https://compositematrix.com/compare/airtech-dahlpac-mc79-combined-peel-ply-release-film-flow-mesh-vs-airtech-greenflow-75-high-speed-extruded-resin-flow-media): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Dahlpac MC79 Combined Peel Ply + Release Film + Flow Mesh vs. Airtech Ipplon KM1300 Soft-Drape Marine Infusion Bagging Film](https://compositematrix.com/compare/airtech-dahlpac-mc79-combined-peel-ply-release-film-flow-mesh-vs-airtech-ipplon-km1300-soft-drape-marine-infusion-bagging-film): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Dahlpac MC79 Combined Peel Ply + Release Film + Flow Mesh vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-dahlpac-mc79-combined-peel-ply-release-film-flow-mesh-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply vs. Airtech Greenflow 75 High-Speed Extruded Resin Flow Media](https://compositematrix.com/compare/airtech-econostitch-85-gsm-nylon-pin-striped-peel-ply-vs-airtech-greenflow-75-high-speed-extruded-resin-flow-media): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply vs. Airtech Release Ease 234 TFP PTFE-Coated Fiberglass Peel Ply](https://compositematrix.com/compare/airtech-econostitch-85-gsm-nylon-pin-striped-peel-ply-vs-airtech-release-ease-234-tfp-ptfe-coated-fiberglass-peel-ply): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply vs. Airtech Wrightlon 5400 Nylon Vacuum Bagging Film](https://compositematrix.com/compare/airtech-econostitch-85-gsm-nylon-pin-striped-peel-ply-vs-airtech-wrightlon-5400-nylon-vacuum-bagging-film): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-econostitch-85-gsm-nylon-pin-striped-peel-ply-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech Greenflow 75 High-Speed Extruded Resin Flow Media vs. Airtech GS-213-3 High-Tack Vacuum Bag Sealant Tape (Tacky Tape)](https://compositematrix.com/compare/airtech-greenflow-75-high-speed-extruded-resin-flow-media-vs-airtech-gs-213-3-high-tack-vacuum-bag-sealant-tape-tacky-tape): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Greenflow 75 High-Speed Extruded Resin Flow Media vs. Airtech Ipplon KM1300 Soft-Drape Marine Infusion Bagging Film](https://compositematrix.com/compare/airtech-greenflow-75-high-speed-extruded-resin-flow-media-vs-airtech-ipplon-km1300-soft-drape-marine-infusion-bagging-film): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Greenflow 75 High-Speed Extruded Resin Flow Media vs. Airtech Omega Flow Line Silicone Resin Infusion Channel](https://compositematrix.com/compare/airtech-greenflow-75-high-speed-extruded-resin-flow-media-vs-airtech-omega-flow-line-silicone-resin-infusion-channel): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Greenflow 75 High-Speed Extruded Resin Flow Media vs. Airtech Release Ease 234 TFP PTFE-Coated Fiberglass Peel Ply](https://compositematrix.com/compare/airtech-greenflow-75-high-speed-extruded-resin-flow-media-vs-airtech-release-ease-234-tfp-ptfe-coated-fiberglass-peel-ply): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Greenflow 75 High-Speed Extruded Resin Flow Media vs. Airtech Resinflow 90 Heavy-Duty Hull Infusion Distribution Mesh](https://compositematrix.com/compare/airtech-greenflow-75-high-speed-extruded-resin-flow-media-vs-airtech-resinflow-90-heavy-duty-hull-infusion-distribution-mesh): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Greenflow 75 High-Speed Extruded Resin Flow Media vs. MTI Hose 20mm PTFE Semi-Permeable Vacuum Vapor Membrane Tube](https://compositematrix.com/compare/airtech-greenflow-75-high-speed-extruded-resin-flow-media-vs-mti-hose-20mm-ptfe-semi-permeable-vacuum-vapor-membrane-tube): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Greenflow 75 High-Speed Extruded Resin Flow Media vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-greenflow-75-high-speed-extruded-resin-flow-media-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech GS-213-3 High-Tack Vacuum Bag Sealant Tape (Tacky Tape) vs. Airtech Omega Flow Line Silicone Resin Infusion Channel](https://compositematrix.com/compare/airtech-gs-213-3-high-tack-vacuum-bag-sealant-tape-tacky-tape-vs-airtech-omega-flow-line-silicone-resin-infusion-channel): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech GS-213-3 High-Tack Vacuum Bag Sealant Tape (Tacky Tape) vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-gs-213-3-high-tack-vacuum-bag-sealant-tape-tacky-tape-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech Ipplon KM1300 Soft-Drape Marine Infusion Bagging Film vs. Airtech Wrightlon 5400 Nylon Vacuum Bagging Film](https://compositematrix.com/compare/airtech-ipplon-km1300-soft-drape-marine-infusion-bagging-film-vs-airtech-wrightlon-5400-nylon-vacuum-bagging-film): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Ipplon KM1300 Soft-Drape Marine Infusion Bagging Film vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-ipplon-km1300-soft-drape-marine-infusion-bagging-film-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech Omega Flow Line Silicone Resin Infusion Channel vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-omega-flow-line-silicone-resin-infusion-channel-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech Release Ease 234 TFP PTFE-Coated Fiberglass Peel Ply vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-release-ease-234-tfp-ptfe-coated-fiberglass-peel-ply-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech Resinflow 90 Heavy-Duty Hull Infusion Distribution Mesh vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-resinflow-90-heavy-duty-hull-infusion-distribution-mesh-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [Airtech Wrightlon 5400 Nylon Vacuum Bagging Film vs. MTI Hose 20mm PTFE Semi-Permeable Vacuum Vapor Membrane Tube](https://compositematrix.com/compare/airtech-wrightlon-5400-nylon-vacuum-bagging-film-vs-mti-hose-20mm-ptfe-semi-permeable-vacuum-vapor-membrane-tube): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced Materials
- [Airtech Wrightlon 5400 Nylon Vacuum Bagging Film vs. Wrightlon® 7400 High-Elongation Bagging Film](https://compositematrix.com/compare/airtech-wrightlon-5400-nylon-vacuum-bagging-film-vs-wrightlon-7400): Category Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes | Airtech Advanced Materials vs. Airtech Advanced
- [AOC Altek H596-HHA General Purpose Boatbuilding Ortho Resin vs. Interplastic CoREZYN COR75-AQ-010 Lloyd's Marine Iso Polyester](https://compositematrix.com/compare/aoc-altek-h596-hha-general-purpose-boatbuilding-ortho-resin-vs-interplastic-corezyn-cor75-aq-010-lloyd-s-marine-iso-polyester): Category Isophthalic & DCPD Marine Polyester Resins | AOC Resins vs. Interplastic Corp
- [AOC Altek H596-HHA General Purpose Boatbuilding Ortho Resin vs. Interplastic Silmar SIL95BA-41 Crystal Clear Surfboard Polyester](https://compositematrix.com/compare/aoc-altek-h596-hha-general-purpose-boatbuilding-ortho-resin-vs-interplastic-silmar-sil95ba-41-crystal-clear-surfboard-polyester): Category Isophthalic & DCPD Marine Polyester Resins | AOC Resins vs. Interplastic Corp
- [AOC Altek H596-HHA General Purpose Boatbuilding Ortho Resin vs. Polynt Polylite 33750-10 Isophthalic Structural Laminating Resin](https://compositematrix.com/compare/aoc-altek-h596-hha-general-purpose-boatbuilding-ortho-resin-vs-polynt-polylite-33750-10-isophthalic-structural-laminating-resin): Category Isophthalic & DCPD Marine Polyester Resins | AOC Resins vs. Polynt Composites USA
- [AOC Hydropel R037-YAA-35 Marine Tie-Coat Vinyl Ester vs. CoREZYN® CORVE8100 Infusion Resin](https://compositematrix.com/compare/aoc-hydropel-r037-yaa-35-marine-tie-coat-vinyl-ester-vs-corezyn-corve8100): Category Marine & Novolac Vinyl Ester Resins | AOC Resins vs. Interplastic Corp
- [AOC Hydropel R037-YAA-35 Marine Tie-Coat Vinyl Ester vs. INEOS Derakane 8084 Elastomer-Modified Tough Vinyl Ester](https://compositematrix.com/compare/aoc-hydropel-r037-yaa-35-marine-tie-coat-vinyl-ester-vs-ineos-derakane-8084-elastomer-modified-tough-vinyl-ester): Category Marine & Novolac Vinyl Ester Resins | AOC Resins vs. INEOS Composites US
- [AOC Hydropel R037-YAA-35 Marine Tie-Coat Vinyl Ester vs. INEOS Derakane Signia 411-350 Low-Odor Marine Vinyl Ester](https://compositematrix.com/compare/aoc-hydropel-r037-yaa-35-marine-tie-coat-vinyl-ester-vs-ineos-derakane-signia-411-350-low-odor-marine-vinyl-ester): Category Marine & Novolac Vinyl Ester Resins | AOC Resins vs. INEOS Composites US
- [AOC Hydropel R037-YAA-35 Marine Tie-Coat Vinyl Ester vs. Scott Bader Crystic VE679PA Marine Infusion Skin VE](https://compositematrix.com/compare/aoc-hydropel-r037-yaa-35-marine-tie-coat-vinyl-ester-vs-scott-bader-crystic-ve679pa-marine-infusion-skin-ve): Category Marine & Novolac Vinyl Ester Resins | AOC Resins vs. Scott Bader North America

## Normalized ASTM Composite Materials Catalog (152 Verified SKUs)
- [3A Composites Airex C70.75 Cross-Linked PVC Sandwich Core (3A Composites)](https://compositematrix.com/materials/3a-composites-airex-c70-75-cross-linked-pvc-sandwich-core): SKU 3AC-C70-75-20MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 2.7 MPa (392 psi) | ASTM D648 HDT: 88 °C | ASTM D790 Flexural: 3.8 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1219 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [3A Composites Airex T92.100 Structural PET Foam Core (3A Composites)](https://compositematrix.com/materials/3a-composites-airex-t92-100-structural-pet-foam-core): SKU 3AC-T92-100-20MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Thermoplastic PET Foam) | ASTM D638 Tensile: 2.6 MPa (377 psi) | ASTM D648 HDT: 135 °C | ASTM D790 Flexural: 3.4 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated (N/A) | US Price: $138 (Sheet 1220x2440x20mm (Grooved & Perforated)) | Drop-In Equivalents: Armacell ArmaForm PET GR100, Gurit Kerdyn Green 100
- [3A Composites Baltek SB.100 Structural End-Grain Balsa Core (3A Composites)](https://compositematrix.com/materials/3a-composites-baltek-sb-100-structural-end-grain-balsa-core): SKU 3AC-BAL-SB100 | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 13.5 MPa (1958 psi) | ASTM D648 HDT: 160 °C | ASTM D790 Flexural: 16 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1008 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [3M Scotch-Weld DP420 Toughened Two-Part Epoxy Adhesive (3M Industrial Adhesives)](https://compositematrix.com/materials/3m-scotch-weld-dp420-toughened-two-part-epoxy-adhesive): SKU 3M-DP420-CASE | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Structural Epoxy Adhesive) | ASTM D638 Tensile: 36 MPa (5221 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 54 MPa | Viscosity: 45000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 8 Corrosive (UN2735) | US Price: $960 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [3M Scotch-Weld DP460 High-Peel Carbon Bonding Epoxy (3M Industrial Adhesives)](https://compositematrix.com/materials/3m-scotch-weld-dp460-high-peel-carbon-bonding-epoxy): SKU 3M-DP460-CASE | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Structural Epoxy Adhesive) | ASTM D638 Tensile: 38.5 MPa (5584 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 56.5 MPa | Viscosity: 52000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 8 Corrosive (UN2735) | US Price: $1020 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [Advantex® Corrosion-Resistant Direct Roving (Owens Corning)](https://compositematrix.com/materials/advantex-ecr-roving): SKU OC-ADVANTEX-PALLET | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-CR Fiberglass) | ASTM D638 Tensile: 3378.4 MPa (490000 psi) | ASTM D648 HDT: 232.2 °C | ASTM D790 Flexural: 4898.7 MPa | Viscosity: 17 cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Hazmat Palletized Freight (N/A) | US Price: $2400 (Pallet (48 Doffs)) | Drop-In Equivalents: NEG Hybon® 2026 E-CR Roving
- [AGY S-2 Glass High-Strength Ballistic & Aerospace Roving (AGY Holding Corp (Aiken, SC))](https://compositematrix.com/materials/agy-s-2-glass-high-strength-ballistic-aerospace-roving): SKU AGY-S2GLASS-463 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 1850 MPa (268320 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1420 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $2450 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-airweave-n10-non-woven-polyester-breather-bleeder): SKU AIR-AIRWV-N10 | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (Autoclave Breather Felt) | ASTM D638 Tensile: 18 MPa (2611 psi) | ASTM D648 HDT: 204 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $305 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech AT-200Y Economical Ambient Infusion Sealant Tape (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-at-200y-economical-ambient-infusion-sealant-tape): SKU AIR-AT200Y-CASE | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (Infusion Tacky Tape) | ASTM D638 Tensile: 3.8 MPa (551 psi) | ASTM D648 HDT: 150 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $286 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech Dahlpac MC79 Combined Peel Ply + Release Film + Flow Mesh (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-dahlpac-mc79-combined-peel-ply-release-film-flow-mesh): SKU AIR-DAHLPAC-MC79 | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (3-in-1 Infusion Consumable Pack) | ASTM D638 Tensile: 58 MPa (8412 psi) | ASTM D648 HDT: 150 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $602 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-econostitch-85-gsm-nylon-pin-striped-peel-ply): SKU AIR-ECONO-60IN | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (Release Peel Ply Fabric) | ASTM D638 Tensile: 74 MPa (10733 psi) | ASTM D648 HDT: 190 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $322 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech Greenflow 75 High-Speed Extruded Resin Flow Media (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-greenflow-75-high-speed-extruded-resin-flow-media): SKU AIR-GRNFLOW75 | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (HDPE Infusion Flow Mesh) | ASTM D638 Tensile: 24 MPa (3481 psi) | ASTM D648 HDT: 125 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $269 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech GS-213-3 High-Tack Vacuum Bag Sealant Tape (Tacky Tape) (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-gs-213-3-high-tack-vacuum-bag-sealant-tape-tacky-tape): SKU AIR-GS213-CASE | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (Butyl Vacuum Sealant Tape) | ASTM D638 Tensile: 4.2 MPa (609 psi) | ASTM D648 HDT: 204 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $378 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech Ipplon KM1300 Soft-Drape Marine Infusion Bagging Film (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-ipplon-km1300-soft-drape-marine-infusion-bagging-film): SKU AIR-KM1300-120 | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (Co-Extruded Nylon Bagging Film) | ASTM D638 Tensile: 62 MPa (8992 psi) | ASTM D648 HDT: 160 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $358 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech Omega Flow Line Silicone Resin Infusion Channel (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-omega-flow-line-silicone-resin-infusion-channel): SKU AIR-OMEGA-FLOW | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (Reusable Silicone Feed Channel) | ASTM D638 Tensile: 9.5 MPa (1378 psi) | ASTM D648 HDT: 220 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $532 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech Release Ease 234 TFP PTFE-Coated Fiberglass Peel Ply (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-release-ease-234-tfp-ptfe-coated-fiberglass-peel-ply): SKU AIR-RE234TFP | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (PTFE Coated Peel Ply) | ASTM D638 Tensile: 110 MPa (15954 psi) | ASTM D648 HDT: 260 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $784 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech Resinflow 90 Heavy-Duty Hull Infusion Distribution Mesh (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-resinflow-90-heavy-duty-hull-infusion-distribution-mesh): SKU AIR-RESFLOW90 | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (Infusion Distribution Mesh) | ASTM D638 Tensile: 28 MPa (4061 psi) | ASTM D648 HDT: 135 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $291 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [Airtech Wrightlon 5400 Nylon Vacuum Bagging Film (Airtech Advanced Materials)](https://compositematrix.com/materials/airtech-wrightlon-5400-nylon-vacuum-bagging-film): SKU AIR-WL5400-60IN | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (High-Temp Vacuum Film) | ASTM D638 Tensile: 65 MPa (9427 psi) | ASTM D648 HDT: 177 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated (N/A) | US Price: $445 (500 ft Roll (60" Wide)) | Drop-In Equivalents: Airtech Wrightlon 7400, VacPak NBF-540
- [AOC Altek H596-HHA General Purpose Boatbuilding Ortho Resin (AOC Resins)](https://compositematrix.com/materials/aoc-altek-h596-hha-general-purpose-boatbuilding-ortho-resin): SKU AOC-ALT-H596 | Category: [/categories/marine-isophthalic-polyesters](https://compositematrix.com/categories/marine-isophthalic-polyesters) (Isophthalic Polyester) | ASTM D638 Tensile: 61 MPa (8847 psi) | ASTM D648 HDT: 72 °C | ASTM D790 Flexural: 109 MPa | Viscosity: 520 cPs | Cure/Companions: MEKP 9% Active Oxygen Catalyst (1.25%–2.0%) + Marine ISO/NPG Gelcoat + 1.5 oz Chopped Strand Mat & 1708 Biaxial E-Glass | Processes: Open-Mold Spray-Up, Hand Layup, Closed-Mold Deck Infusion | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1328 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [AOC Hydropel R037-YAA-35 Marine Tie-Coat Vinyl Ester (AOC Resins)](https://compositematrix.com/materials/aoc-hydropel-r037-yaa-35-marine-tie-coat-vinyl-ester): SKU AOC-HYD-R037 | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 82 MPa (11893 psi) | ASTM D648 HDT: 98 °C | ASTM D790 Flexural: 144 MPa | Viscosity: 420 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2132 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [AOC Synolite 8388-P-1 Closed-Mold Infusion Polyester (AOC Resins)](https://compositematrix.com/materials/aoc-synolite-8388-p-1-closed-mold-infusion-polyester): SKU AOC-SYN8388-DR | Category: [/categories/marine-isophthalic-polyesters](https://compositematrix.com/categories/marine-isophthalic-polyesters) (Isophthalic Polyester) | ASTM D638 Tensile: 68 MPa (9863 psi) | ASTM D648 HDT: 84 °C | ASTM D790 Flexural: 116 MPa | Viscosity: 210 cPs | Cure/Companions: MEKP 9% Active Oxygen Catalyst (1.25%–2.0%) + Marine ISO/NPG Gelcoat + 1.5 oz Chopped Strand Mat & 1708 Biaxial E-Glass | Processes: Open-Mold Spray-Up, Hand Layup, Closed-Mold Deck Infusion | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1553 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [AOC Vipel F010-INF Low-Viscosity Infusion Vinyl Ester (AOC Resins)](https://compositematrix.com/materials/aoc-vipel-f010-inf-low-viscosity-infusion-vinyl-ester): SKU AOC-VIP-F010INF | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 84 MPa (12183 psi) | ASTM D648 HDT: 105 °C | ASTM D790 Flexural: 146 MPa | Viscosity: 175 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2153 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [AOC Vipel F085 Zero-Styrene Marine Resin (AOC Resins)](https://compositematrix.com/materials/aoc-vipel-f085-zero-styrene-marine-resin): SKU AOC-F085-55DR | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 85 MPa (12328 psi) | ASTM D648 HDT: 112 °C | ASTM D790 Flexural: 148 MPa | Viscosity: 380 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1520 (204 kg (55 Gal Drum)) | Drop-In Equivalents: Interplastic CoREZYN CORVE8100, Derakane 411-350
- [AOC Vipel K022 Novolac High-Temp Vinyl Ester (AOC Resins)](https://compositematrix.com/materials/aoc-vipel-k022-novolac-high-temp-vinyl-ester): SKU AOC-VIP-K022 | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 79 MPa (11458 psi) | ASTM D648 HDT: 148 °C | ASTM D790 Flexural: 141 MPa | Viscosity: 340 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2829 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Araldite® LY 1564 / Aradur® 22962 (Huntsman Advanced)](https://compositematrix.com/materials/araldite-ly-1564): SKU HNT-LY1564-DRUM | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Epoxy System) | ASTM D638 Tensile: 88.9 MPa (12900 psi) | ASTM D648 HDT: 120 °C | ASTM D790 Flexural: 128.9 MPa | Viscosity: 220 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: US DOT Class 8 / 9 (Corrosive Polyamine Hardener) (N/A) | US Price: $2340 (Drum + Hardener Kit) | Drop-In Equivalents: Hexion Epikote™ MGS RIMR 135 / RIMH 137
- [Arkema Luperox DDM-9 Marine Grade MEKP Initiator (Arkema Inc.)](https://compositematrix.com/materials/arkema-luperox-ddm-9-marine-grade-mekp-initiator): SKU ARK-LUPDDM9 | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (MEKP Peroxide Initiator) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 18 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 5.2 Organic Peroxide Type D (UN3105) | US Price: $229 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [Ashland Hetron 922 Corrosion-Resistant Vinyl Ester (INEOS / Hetron US)](https://compositematrix.com/materials/ashland-hetron-922-corrosion-resistant-vinyl-ester): SKU HET-922-VE | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 86 MPa (12473 psi) | ASTM D648 HDT: 106 °C | ASTM D790 Flexural: 148 MPa | Viscosity: 390 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2255 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Baltek® SB.100 End-Grain Balsa (3A Composites)](https://compositematrix.com/materials/baltek-sb100): SKU 3AC-SB100-34IN | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Balsa Core) | ASTM D638 Tensile: 13.1 MPa (1900 psi) | ASTM D648 HDT: 148.9 °C | ASTM D790 Flexural: 19 MPa | Viscosity: 9 cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Hazmat Standard Freight (N/A) | US Price: $118 (ContourKore Sheet) | Drop-In Equivalents: Carbon-Core® Balsa 100 / PET Foam 150
- [Chomarat C-Ply BX600 Spread-Tow Biaxial (+/-45) Carbon (Chomarat North America)](https://compositematrix.com/materials/chomarat-c-ply-bx600-spread-tow-biaxial-45-carbon): SKU CHO-CPLY-BX600 | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 4250 MPa (616412 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1710 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $2430 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Chomarat C-Weave 200T 3K 2x2 Twill Carbon Fabric (Chomarat North America)](https://compositematrix.com/materials/chomarat-c-weave-200t-3k-2x2-twill-carbon-fabric): SKU CHO-CW200T-50 | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 3980 MPa (577251 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1620 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $1935 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Chomarat C-WEAVE 200T 3K Carbon Twill (Chomarat)](https://compositematrix.com/materials/chomarat-c-weave-200t-3k-carbon-twill): SKU CHO-CW200T-50IN | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber) | ASTM D638 Tensile: 4100 MPa (594656 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated (N/A) | US Price: $3120 (100 yd Roll (50" Wide)) | Drop-In Equivalents: Hexcel HexForce 282 3K, Toray T300 3K 2x2 Twill
- [Chomarat Rovicore 600/D3/600 Closed-Mold RTM Flow Glass (Chomarat North America)](https://compositematrix.com/materials/chomarat-rovicore-600-d3-600-closed-mold-rtm-flow-glass): SKU CHO-ROVI-600D3 | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 540 MPa (78321 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 680 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $820 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Coosa Composites Bluewater 26 High-Density Urethane Transom Board (Coosa Composites (Pelham, AL))](https://compositematrix.com/materials/coosa-composites-bluewater-26-high-density-urethane-transom-board): SKU COO-BW26-1.5IN | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 14.8 MPa (2147 psi) | ASTM D648 HDT: 115 °C | ASTM D790 Flexural: 28.5 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1094 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Corecell™ M80 Marine SAN Foam Core (Gurit)](https://compositematrix.com/materials/gurit-corecell-m80): SKU GUR-CCM80-34IN | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (SAN Marine Core) | ASTM D638 Tensile: 2.4 MPa (355 psi) | ASTM D648 HDT: 95 °C | ASTM D790 Flexural: 3.5 MPa | Viscosity: 5 cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Hazmat Standard Freight (N/A) | US Price: $168 (Sheet (48 x 96 in)) | Drop-In Equivalents: Diab Divinycell® H80 / HP80
- [CoREZYN® CORVE8100 Infusion Resin (Interplastic Corp)](https://compositematrix.com/materials/corezyn-corve8100): SKU INT-CORVE8100-55G | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Vinyl Ester) | ASTM D638 Tensile: 81.4 MPa (11800 psi) | ASTM D648 HDT: 105 °C | ASTM D790 Flexural: 118 MPa | Viscosity: 175 cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: US DOT Class 3 (UN1866 Resin Solution) (UN1866) | US Price: $1480 (55-Gal Drum (450 lbs)) | Drop-In Equivalents: AOC Vipel® F010-SER / Derakane 411-350
- [Derakane™ 510A-40 Brominated Vinyl Ester (Ashland / INEOS)](https://compositematrix.com/materials/derakane-510a-40): SKU ASH-DER510A-55G | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Fire-Retardant VE) | ASTM D638 Tensile: 79.3 MPa (11500 psi) | ASTM D648 HDT: 104.4 °C | ASTM D790 Flexural: 115 MPa | Viscosity: 250 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: US DOT Class 3 (UN1866 Flammable Liquid) (UN1866) | US Price: $1890 (55-Gal Drum (475 lbs)) | Drop-In Equivalents: Interplastic CoREZYN® CORVE8100 (Non-FR) / Dion FR-9300
- [Diab Divinycell H100 Structural PVC Core (Diab Group)](https://compositematrix.com/materials/diab-divinycell-h100-structural-pvc-core): SKU DIAB-H100-19MM-GS | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Cross-Linked PVC Foam) | ASTM D638 Tensile: 3.5 MPa (508 psi) | ASTM D648 HDT: 90 °C | ASTM D790 Flexural: 4.8 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated (N/A) | US Price: $184 (Sheet 1220x2440x19mm (Grid-Scored)) | Drop-In Equivalents: Gurit Corecell M100, Airex C70.90
- [Diab Divinycell H130 High-Shear Slamming Zone PVC Core (Diab Group)](https://compositematrix.com/materials/diab-divinycell-h130-high-shear-slamming-zone-pvc-core): SKU DIAB-H130-25MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 4.8 MPa (696 psi) | ASTM D648 HDT: 92 °C | ASTM D790 Flexural: 6.5 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1368 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Diab Divinycell H200 High-Compression Hard-Point PVC Core (Diab Group)](https://compositematrix.com/materials/diab-divinycell-h200-high-compression-hard-point-pvc-core): SKU DIAB-H200-25MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 7.1 MPa (1030 psi) | ASTM D648 HDT: 95 °C | ASTM D790 Flexural: 9.8 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1536 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Diab Divinycell H45 Light Weight Marine PVC Core (Diab Group)](https://compositematrix.com/materials/diab-divinycell-h45-light-weight-marine-pvc-core): SKU DIAB-H45-15MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 1.4 MPa (203 psi) | ASTM D648 HDT: 85 °C | ASTM D790 Flexural: 1.8 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1152 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Diab Divinycell H60 Medium Density Sandwich PVC Core (Diab Group)](https://compositematrix.com/materials/diab-divinycell-h60-medium-density-sandwich-pvc-core): SKU DIAB-H60-20MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 1.8 MPa (261 psi) | ASTM D648 HDT: 88 °C | ASTM D790 Flexural: 2.4 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1190 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Diab Divinycell HT90 Aerospace Prepreg Cure PVC Core (Diab Group)](https://compositematrix.com/materials/diab-divinycell-ht90-aerospace-prepreg-cure-pvc-core): SKU DIAB-HT90-12MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 3.1 MPa (450 psi) | ASTM D648 HDT: 140 °C | ASTM D790 Flexural: 4.2 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1752 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Divinycell® H80 Structural PVC Foam (Diab Group)](https://compositematrix.com/materials/divinycell-h80): SKU DIAB-H80-34IN-GS | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Foam) | ASTM D638 Tensile: 2.5 MPa (362 psi) | ASTM D648 HDT: 80 °C | ASTM D790 Flexural: 3.6 MPa | Viscosity: 5 cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Hazmat Standard Freight (N/A) | US Price: $142 (Sheet (48 x 96 in)) | Drop-In Equivalents: Gurit® Corecell™ M80 SAN Structural Foam
- [DuPont Kevlar 49 Style 285 4HS Crowfoot Ballistic Aramid (DuPont / Hexcel)](https://compositematrix.com/materials/dupont-kevlar-49-style-285-4hs-crowfoot-ballistic-aramid): SKU DUP-KEV49-285 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 1480 MPa (214656 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 990 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $4600 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Gurit Ampreg 31 DNV-GL Certified Laminating Epoxy (Gurit)](https://compositematrix.com/materials/gurit-ampreg-31-dnv-gl-certified-laminating-epoxy): SKU GUR-AMP31-200KG | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 81 MPa (11748 psi) | ASTM D648 HDT: 89 °C | ASTM D790 Flexural: 125 MPa | Viscosity: 420 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3080 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Gurit Ampreg 36 High-Tg Aerospace & Marine Epoxy (Gurit)](https://compositematrix.com/materials/gurit-ampreg-36-high-tg-aerospace-marine-epoxy): SKU GUR-AMP36-200KG | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 84 MPa (12183 psi) | ASTM D648 HDT: 118 °C | ASTM D790 Flexural: 128 MPa | Viscosity: 510 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3560 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Gurit Corecell M100 Dynamic Slamming SAN Foam Core (Gurit)](https://compositematrix.com/materials/gurit-corecell-m100-dynamic-slamming-san-foam-core): SKU GUR-CCM100-25MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 3.9 MPa (566 psi) | ASTM D648 HDT: 98 °C | ASTM D790 Flexural: 5.4 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1430 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Gurit Corecell M130 Heavy Offshore Hull SAN Core (Gurit)](https://compositematrix.com/materials/gurit-corecell-m130-heavy-offshore-hull-san-core): SKU GUR-CCM130-25MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 5.2 MPa (754 psi) | ASTM D648 HDT: 100 °C | ASTM D790 Flexural: 7.1 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1584 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Gurit Corecell M60 Tough Marine SAN Structural Foam (Gurit)](https://compositematrix.com/materials/gurit-corecell-m60-tough-marine-san-structural-foam): SKU GUR-CCM60-20MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 2.1 MPa (305 psi) | ASTM D648 HDT: 95 °C | ASTM D790 Flexural: 2.9 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1320 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Gurit Kerdyn Green 115 Recyclable Structural PET Core (Gurit)](https://compositematrix.com/materials/gurit-kerdyn-green-115-recyclable-structural-pet-core): SKU GUR-KER115-20MM | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 2.9 MPa (421 psi) | ASTM D648 HDT: 108 °C | ASTM D790 Flexural: 3.6 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $922 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Gurit Prime 27 Ultra-Low Viscosity Infusion Epoxy (Gurit)](https://compositematrix.com/materials/gurit-prime-27-ultra-low-viscosity-infusion-epoxy): SKU GUR-PRM27-200KG | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 77 MPa (11168 psi) | ASTM D648 HDT: 85 °C | ASTM D790 Flexural: 121 MPa | Viscosity: 195 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $2980 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Gurit Prime 37 Infusion Epoxy System (Gurit)](https://compositematrix.com/materials/gurit-prime-37-infusion-epoxy-system): SKU GUR-PRM37-200KG | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 79 MPa (11458 psi) | ASTM D648 HDT: 88 °C | ASTM D790 Flexural: 124 MPa | Viscosity: 245 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $2960 (200 kg Drum Kit) | Drop-In Equivalents: Huntsman Araldite LY 1564, Hexion EPIKOTE RIMR 135
- [Henkel Loctite Frekote 700-NC Semi-Permanent Mold Release (Henkel Aerospace & Composites)](https://compositematrix.com/materials/henkel-loctite-frekote-700-nc-semi-permanent-mold-release): SKU HEN-FRK700NC-5G | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Semi-Permanent Polymer Mold Release) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: N/A MPa | Viscosity: 12 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1263) | US Price: $680 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [Henkel Loctite Frekote B-15 Mold Micro-Porosity Sealer (Henkel Aerospace & Composites)](https://compositematrix.com/materials/henkel-loctite-frekote-b-15-mold-micro-porosity-sealer): SKU HEN-FRKB15-1G | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Tooling Mold Sealer) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: N/A MPa | Viscosity: 15 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1263) | US Price: $730 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [Hexcel HexForce 3733 3K Plain Weave Carbon Fabric (197 gsm) (Hexcel Corporation)](https://compositematrix.com/materials/hexcel-hexforce-3733-3k-plain-weave-carbon-fabric-197-gsm): SKU HXL-HF3733-50 | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 3850 MPa (558396 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1610 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $2070 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Hexcel HexForce 7500 10 oz Boatbuilding Woven E-Glass Cloth (Hexcel Corporation)](https://compositematrix.com/materials/hexcel-hexforce-7500-10-oz-boatbuilding-woven-e-glass-cloth): SKU HXL-HF7500-60 | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 610 MPa (88473 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 760 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $980 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Hexcel HexForce 7781 8-Harness Satin Aerospace E-Glass (Hexcel Corporation)](https://compositematrix.com/materials/hexcel-hexforce-7781-8-harness-satin-aerospace-e-glass): SKU HXL-HF7781-50 | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 690 MPa (100076 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 840 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $1420 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Hexcel HexForce G0926 6K 5HS Satin Carbon Fabric (370 gsm) (Hexcel Corporation)](https://compositematrix.com/materials/hexcel-hexforce-g0926-6k-5hs-satin-carbon-fabric-370-gsm): SKU HXL-G0926-50 | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 4120 MPa (597557 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1690 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $2228 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Hexcel HexPly 8552 / IM7 Toughened Autoclave Epoxy Prepreg (Hexcel Corporation)](https://compositematrix.com/materials/hexcel-hexply-8552-im7-toughened-autoclave-epoxy-prepreg): SKU HXL-8552-IM7 | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 2720 MPa (394503 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1790 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $6210 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Hexcel HexPly M21 Primary Structure Aerospace Carbon Prepreg (Hexcel Corporation)](https://compositematrix.com/materials/hexcel-hexply-m21-primary-structure-aerospace-carbon-prepreg): SKU HXL-M21-IMA | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 2850 MPa (413358 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1820 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $6390 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Hexcel HexTow AS4 12K Aerospace Qualified Carbon Fiber (Hexcel Corporation)](https://compositematrix.com/materials/hexcel-hextow-as4-12k-aerospace-qualified-carbon-fiber): SKU HXL-AS4-12K | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 4410 MPa (639618 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1680 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $2003 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Hexcel HexTow IM7 12K Intermediate Modulus Carbon Fiber (Hexcel Corporation)](https://compositematrix.com/materials/hexcel-hextow-im7-12k-intermediate-modulus-carbon-fiber): SKU HXL-IM7-12K | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 5650 MPa (819465 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1840 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $3690 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [HexForce® 282 3K Plain Weave Carbon (Hexcel Corp)](https://compositematrix.com/materials/hexforce-282-carbon): SKU HEX-HF282-3K-50IN | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber) | ASTM D638 Tensile: 3792.1 MPa (550000 psi) | ASTM D648 HDT: 260 °C | ASTM D790 Flexural: 5498.5 MPa | Viscosity: 198 cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Hazmat Standard Freight (N/A) | US Price: $2850 (100-Yd Master Roll (50 in)) | Drop-In Equivalents: Torayca® T300 3K Plain Weave (Style 3055)
- [Hexion EPIKOTE Resin MGS RIMR 135 (Hexion)](https://compositematrix.com/materials/hexion-epikote-resin-mgs-rimr-135): SKU HEX-RIMR135-DRUM | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Structural Epoxy) | ASTM D638 Tensile: 76 MPa (11023 psi) | ASTM D648 HDT: 86 °C | ASTM D790 Flexural: 122 MPa | Viscosity: 280 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $2820 (200 kg Drum) | Drop-In Equivalents: Gurit Prime 37, Huntsman Araldite LY 1564
- [Hexion EPON Resin 828 Unmodified Bisphenol-A Epoxy (Hexion)](https://compositematrix.com/materials/hexion-epon-resin-828-unmodified-bisphenol-a-epoxy): SKU HEX-EPON828-DR | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 83 MPa (12038 psi) | ASTM D648 HDT: 115 °C | ASTM D790 Flexural: 127 MPa | Viscosity: 12000 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $2360 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Hexion EPON Resin 862 Low-Viscosity Bisphenol-F Epoxy (Hexion)](https://compositematrix.com/materials/hexion-epon-resin-862-low-viscosity-bisphenol-f-epoxy): SKU HEX-EPON862-DR | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 86 MPa (12473 psi) | ASTM D648 HDT: 108 °C | ASTM D790 Flexural: 130 MPa | Viscosity: 3200 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $2680 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [HK Research HydroShield Vinyl Ester Tooling Gelcoat (HK Research Corp)](https://compositematrix.com/materials/hk-research-hydroshield-vinyl-ester-tooling-gelcoat): SKU HKR-HYDSHLD-5G | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Tooling Gelcoat) | ASTM D638 Tensile: 81 MPa (11748 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 99 MPa | Viscosity: 18000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $336 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [HK Research MaxGuard NP White Marine ISO/NPG Gelcoat (HK Research Corp)](https://compositematrix.com/materials/hk-research-maxguard-np-white-marine-iso-npg-gelcoat): SKU HKR-MGNP-55DR | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Marine ISO/NPG Gelcoat) | ASTM D638 Tensile: 72 MPa (10443 psi) | ASTM D648 HDT: 88 °C | ASTM D790 Flexural: 128 MPa | Viscosity: 14500 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1950 (227 kg (55 Gal Drum)) | Drop-In Equivalents: Polynt Armorcote 950, Interplastic Silmar S-809
- [Huntsman Araldite LY 1564 SP Infusion Epoxy Resin (Huntsman Advanced Materials)](https://compositematrix.com/materials/huntsman-araldite-ly-1564-sp-infusion-epoxy-resin): SKU HUN-LY1564-200KG | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 79 MPa (11458 psi) | ASTM D648 HDT: 92 °C | ASTM D790 Flexural: 123 MPa | Viscosity: 260 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3040 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Huntsman Araldite LY 5052 Cold-Cure Aerospace Epoxy (Huntsman Advanced Materials)](https://compositematrix.com/materials/huntsman-araldite-ly-5052-cold-cure-aerospace-epoxy): SKU HUN-LY5052-DR | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 86 MPa (12473 psi) | ASTM D648 HDT: 128 °C | ASTM D790 Flexural: 130 MPa | Viscosity: 680 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3900 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Huntsman Araldite MY 721 Tetrafunctional Aerospace Epoxy (Huntsman Advanced Materials)](https://compositematrix.com/materials/huntsman-araldite-my-721-tetrafunctional-aerospace-epoxy): SKU HUN-MY721-50KG | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 92 MPa (13343 psi) | ASTM D648 HDT: 195 °C | ASTM D790 Flexural: 136 MPa | Viscosity: 4500 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $6800 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [INEOS Aropol Q6585 Low-Styrene Marine Laminating Polyester (INEOS Composites US)](https://compositematrix.com/materials/ineos-aropol-q6585-low-styrene-marine-laminating-polyester): SKU INE-ARO-Q6585 | Category: [/categories/marine-isophthalic-polyesters](https://compositematrix.com/categories/marine-isophthalic-polyesters) (Isophthalic Polyester) | ASTM D638 Tensile: 67 MPa (9718 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 115 MPa | Viscosity: 510 cPs | Cure/Companions: MEKP 9% Active Oxygen Catalyst (1.25%–2.0%) + Marine ISO/NPG Gelcoat + 1.5 oz Chopped Strand Mat & 1708 Biaxial E-Glass | Processes: Open-Mold Spray-Up, Hand Layup, Closed-Mold Deck Infusion | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1485 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [INEOS Derakane 411-200 Low-Viscosity Infusion Vinyl Ester (INEOS Composites US)](https://compositematrix.com/materials/ineos-derakane-411-200-low-viscosity-infusion-vinyl-ester): SKU INE-DRK-411-200-DR | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 86 MPa (12473 psi) | ASTM D648 HDT: 104 °C | ASTM D790 Flexural: 150 MPa | Viscosity: 200 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2296 (205 kg Steel Drum) | Drop-In Equivalents: Polynt Dion 9100-700, AOC Vipel F010-INF
- [INEOS Derakane 441-400 Low-Styrene Structural Vinyl Ester (INEOS Composites US)](https://compositematrix.com/materials/ineos-derakane-441-400-low-styrene-structural-vinyl-ester): SKU INE-DRK-441-400-DR | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 88 MPa (12763 psi) | ASTM D648 HDT: 118 °C | ASTM D790 Flexural: 154 MPa | Viscosity: 400 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2419 (205 kg Steel Drum) | Drop-In Equivalents: AOC Vipel F085, Polynt Dion 9800
- [INEOS Derakane 470-36 High-Temp Epoxy Novolac Vinyl Ester (INEOS Composites US)](https://compositematrix.com/materials/ineos-derakane-470-36-high-temp-epoxy-novolac-vinyl-ester): SKU INE-DRK-470-36-DR | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Vinyl Ester) | ASTM D638 Tensile: 78 MPa (11313 psi) | ASTM D648 HDT: 152 °C | ASTM D790 Flexural: 142 MPa | Viscosity: 360 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2952 (205 kg Steel Drum) | Drop-In Equivalents: Derakane 470-300, AOC Vipel K022
- [INEOS Derakane 510A-40 Brominated Fire-Retardant Vinyl Ester (INEOS Composites US)](https://compositematrix.com/materials/ineos-derakane-510a-40-brominated-fire-retardant-vinyl-ester): SKU INE-DRK-510A-40-DR | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 81 MPa (11748 psi) | ASTM D648 HDT: 108 °C | ASTM D790 Flexural: 140 MPa | Viscosity: 400 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2768 (205 kg Steel Drum) | Drop-In Equivalents: Polynt Dion FR-9300, AOC Vipel F510
- [INEOS Derakane 510C-350 Class-1 Flame Retardant Vinyl Ester (INEOS Composites US)](https://compositematrix.com/materials/ineos-derakane-510c-350-class-1-flame-retardant-vinyl-ester): SKU INE-DRK-510C-350-DR | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 83 MPa (12038 psi) | ASTM D648 HDT: 110 °C | ASTM D790 Flexural: 144 MPa | Viscosity: 350 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2850 (205 kg Steel Drum) | Drop-In Equivalents: Derakane 510A-40, Hetron FR-992
- [INEOS Derakane 8084 Elastomer-Modified Tough Vinyl Ester (INEOS Composites US)](https://compositematrix.com/materials/ineos-derakane-8084-elastomer-modified-tough-vinyl-ester): SKU INE-DRK-8084-DR | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 76 MPa (11023 psi) | ASTM D648 HDT: 84 °C | ASTM D790 Flexural: 132 MPa | Viscosity: 380 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2645 (205 kg Steel Drum) | Drop-In Equivalents: Polynt Dion 9500, Hydropel R037
- [INEOS Derakane Signia 411-350 Low-Odor Marine Vinyl Ester (INEOS Composites US)](https://compositematrix.com/materials/ineos-derakane-signia-411-350-low-odor-marine-vinyl-ester): SKU INE-DRK-SIGNIA-DR | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 86 MPa (12473 psi) | ASTM D648 HDT: 105 °C | ASTM D790 Flexural: 152 MPa | Viscosity: 350 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2337 (205 kg Steel Drum) | Drop-In Equivalents: Derakane 411-350, CoREZYN CORVE8100
- [INEOS Derakane Signia 470-300 Novolac Vinyl Ester (INEOS Composites)](https://compositematrix.com/materials/ineos-derakane-signia-470-300-novolac-vinyl-ester): SKU INE-DRK470-55DR | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Epoxy Novolac Vinyl Ester) | ASTM D638 Tensile: 86 MPa (12473 psi) | ASTM D648 HDT: 150 °C | ASTM D790 Flexural: 152 MPa | Viscosity: 300 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1885 (205 kg (55 Gal Drum)) | Drop-In Equivalents: AOC Vipel F010-SER, Interplastic CoREZYN VE8440
- [INEOS Envirez G8600 Bio-Derived Structural Polyester (INEOS Composites US)](https://compositematrix.com/materials/ineos-envirez-g8600-bio-derived-structural-polyester): SKU INE-ENV-G8600 | Category: [/categories/marine-isophthalic-polyesters](https://compositematrix.com/categories/marine-isophthalic-polyesters) (Isophthalic Polyester) | ASTM D638 Tensile: 70 MPa (10153 psi) | ASTM D648 HDT: 88 °C | ASTM D790 Flexural: 118 MPa | Viscosity: 470 cPs | Cure/Companions: MEKP 9% Active Oxygen Catalyst (1.25%–2.0%) + Marine ISO/NPG Gelcoat + 1.5 oz Chopped Strand Mat & 1708 Biaxial E-Glass | Processes: Open-Mold Spray-Up, Hand Layup, Closed-Mold Deck Infusion | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1710 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [Interplastic CoREZYN COR61-AA-255 Low-Shrink DCPD Laminating Resin (Interplastic Corp)](https://compositematrix.com/materials/interplastic-corezyn-cor61-aa-255-low-shrink-dcpd-laminating-resin): SKU IPC-COR61AA | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Isophthalic Polyester) | ASTM D638 Tensile: 63 MPa (9137 psi) | ASTM D648 HDT: 80 °C | ASTM D790 Flexural: 111 MPa | Viscosity: 420 cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1395 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [Interplastic CoREZYN COR75-AQ-010 Lloyd's Marine Iso Polyester (Interplastic Corp)](https://compositematrix.com/materials/interplastic-corezyn-cor75-aq-010-lloyd-s-marine-iso-polyester): SKU IPC-COR75AQ | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Isophthalic Polyester) | ASTM D638 Tensile: 74 MPa (10733 psi) | ASTM D648 HDT: 94 °C | ASTM D790 Flexural: 122 MPa | Viscosity: 490 cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1665 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [Interplastic CoREZYN CORVE8300 Novolac Vinyl Ester (Interplastic Corp)](https://compositematrix.com/materials/interplastic-corezyn-corve8300-novolac-vinyl-ester): SKU IPC-CORVE8300 | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Vinyl Ester) | ASTM D638 Tensile: 80 MPa (11603 psi) | ASTM D648 HDT: 144 °C | ASTM D790 Flexural: 142 MPa | Viscosity: 390 cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2706 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Interplastic CoREZYN CORVE8740 Urethane-Modified VE (Interplastic Corp)](https://compositematrix.com/materials/interplastic-corezyn-corve8740-urethane-modified-ve): SKU IPC-CORVE8740 | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Vinyl Ester) | ASTM D638 Tensile: 83 MPa (12038 psi) | ASTM D648 HDT: 102 °C | ASTM D790 Flexural: 145 MPa | Viscosity: 310 cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2276 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Interplastic CoREZYN VE8121 Infusion Marine Vinyl Ester (Interplastic Corp)](https://compositematrix.com/materials/interplastic-corezyn-ve8121-infusion-marine-vinyl-ester): SKU IPC-VE8121-INF | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Vinyl Ester) | ASTM D638 Tensile: 84 MPa (12183 psi) | ASTM D648 HDT: 101 °C | ASTM D790 Flexural: 146 MPa | Viscosity: 165 cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2091 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Interplastic Gel-Coat 944W907 Bright White Marine Gelcoat (Interplastic Corp)](https://compositematrix.com/materials/interplastic-gel-coat-944w907-bright-white-marine-gelcoat): SKU IPC-GC944W-DR | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (ISO/NPG Marine Gelcoat) | ASTM D638 Tensile: 71 MPa (10298 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 89 MPa | Viscosity: 16000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $218 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [Interplastic Silmar SIL95BA-41 Crystal Clear Surfboard Polyester (Interplastic Corp)](https://compositematrix.com/materials/interplastic-silmar-sil95ba-41-crystal-clear-surfboard-polyester): SKU IPC-SIL95BA | Category: [/categories/marine-isophthalic-polyesters](https://compositematrix.com/categories/marine-isophthalic-polyesters) (Isophthalic Polyester) | ASTM D638 Tensile: 66 MPa (9573 psi) | ASTM D648 HDT: 75 °C | ASTM D790 Flexural: 114 MPa | Viscosity: 460 cPs | Cure/Companions: MEKP 9% Active Oxygen Catalyst (1.25%–2.0%) + Marine ISO/NPG Gelcoat + 1.5 oz Chopped Strand Mat & 1708 Biaxial E-Glass | Processes: Open-Mold Spray-Up, Hand Layup, Closed-Mold Deck Infusion | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1755 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [ITW Plexus MA300 Rapid-Cure Methacrylate Structural Adhesive (ITW Performance Polymers)](https://compositematrix.com/materials/itw-plexus-ma300-rapid-cure-methacrylate-structural-adhesive): SKU ITW-MA300-CASE | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Methacrylate Structural Adhesive) | ASTM D638 Tensile: 22.5 MPa (3263 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 40.5 MPa | Viscosity: 110000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1133) | US Price: $590 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [ITW Plexus MA310 Structural Methacrylate Adhesive (ITW Performance Polymers)](https://compositematrix.com/materials/itw-plexus-ma310-structural-methacrylate-adhesive): SKU ITW-MA310-50GAL | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Methacrylate Structural Adhesive) | ASTM D638 Tensile: 20.7 MPa (3002 psi) | ASTM D648 HDT: 78 °C | ASTM D790 Flexural: 34.5 MPa | Viscosity: 125000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1133) | US Price: $540 (19 L Pail (5 Gal Drum)) | Drop-In Equivalents: ITW Plexus MA300, Scott Bader Crestabond M1-20
- [ITW Plexus MA420 High-Impact Stringer Bonding Adhesive (ITW Performance Polymers)](https://compositematrix.com/materials/itw-plexus-ma420-high-impact-stringer-bonding-adhesive): SKU ITW-MA420-5GAL | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Methacrylate Structural Adhesive) | ASTM D638 Tensile: 19.2 MPa (2785 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 37.2 MPa | Viscosity: 135000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1133) | US Price: $560 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [ITW Plexus MA530 Long Open-Time Large Hull Bonding Paste (ITW Performance Polymers)](https://compositematrix.com/materials/itw-plexus-ma530-long-open-time-large-hull-bonding-paste): SKU ITW-MA530-50G | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Methacrylate Structural Adhesive) | ASTM D638 Tensile: 18.6 MPa (2698 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 36.6 MPa | Viscosity: 145000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1133) | US Price: $544 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [ITW Plexus MA530 Toughened Structural Methacrylate Adhesive (ITW Performance Polymers)](https://compositematrix.com/materials/itw-plexus-ma530-toughened-structural-methacrylate-adhesive): SKU ITW-PLX-MA530-5G | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Structural Methacrylate Adhesive) | ASTM D638 Tensile: 21 MPa (3046 psi) | ASTM D648 HDT: 95 °C | ASTM D790 Flexural: 32 MPa | Viscosity: 135000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1133) | US Price: $645 (5 Gal Pail (19 L Drum)) | Drop-In Equivalents: Scott Bader Crestabond M1-30, Lord 406 Acrylic Adhesive
- [Lantor Soric XF 3mm Print-Blocker & Infusion Flow Core (Lantor / Gurit)](https://compositematrix.com/materials/lantor-soric-xf-3mm-print-blocker-infusion-flow-core): SKU LAN-SORIC-XF3 | Category: [/categories/structural-sandwich-cores](https://compositematrix.com/categories/structural-sandwich-cores) (Structural Sandwich Core) | ASTM D638 Tensile: 4.5 MPa (653 psi) | ASTM D648 HDT: 95 °C | ASTM D790 Flexural: 6.2 MPa | Viscosity: Solid cPs | Cure/Companions: Structural Core-Bonding Putty (0.55 kg/m² kerf fill) + Marine Vinyl Ester or Infusion Epoxy Matrix + Vectorply 1708 E-Glass / Carbon Skin Plies | Processes: Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding | DOT 49 CFR: Non-Regulated Solid Polymer (N/A) | US Price: $1128 (Crate of 10 Grooved & Perforated Sheets) | Drop-In Equivalents: Diab Divinycell H80, Gurit Corecell M80
- [Mitsubishi Pyrofil TR50S 15K High-Strength Industrial Carbon (Mitsubishi Chemical Carbon Fiber US)](https://compositematrix.com/materials/mitsubishi-pyrofil-tr50s-15k-high-strength-industrial-carbon): SKU MIT-TR50S-15K | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 4900 MPa (710686 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1720 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $1643 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [MTI Hose 20mm PTFE Semi-Permeable Vacuum Vapor Membrane Tube (Airtech Advanced Materials)](https://compositematrix.com/materials/mti-hose-20mm-ptfe-semi-permeable-vacuum-vapor-membrane-tube): SKU MTI-HOSE-20MM | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (Semi-Permeable Vacuum Membrane) | ASTM D638 Tensile: 32 MPa (4641 psi) | ASTM D648 HDT: 180 °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Regulated Industrial Consumable (N/A) | US Price: $952 (100m Industrial Roll / Case) | Drop-In Equivalents: Airtech Wrightlon 7400, Airtech Greenflow 75
- [NouryonButanox LPT-IN Long Gel-Time Infusion Peroxide (Nouryon (AkzoNobel))](https://compositematrix.com/materials/nouryonbutanox-lpt-in-long-gel-time-infusion-peroxide): SKU NRY-BUTLPTIN | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Infusion Peroxide Initiator) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 17 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 5.2 Organic Peroxide Type D (UN3105) | US Price: $279 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [Nouryon Butanox M-50 Methyl Ethyl Ketone Peroxide (Nouryon (AkzoNobel))](https://compositematrix.com/materials/nouryon-butanox-m-50-methyl-ethyl-ketone-peroxide): SKU NRY-BUTM50-CASE | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (MEKP Peroxide Initiator) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 20 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 5.2 Organic Peroxide Type D (UN3105) | US Price: $225 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [Nouryon Trigonox 239 Non-Foaming Cumyl Peroxide (Nouryon (AkzoNobel))](https://compositematrix.com/materials/nouryon-trigonox-239-non-foaming-cumyl-peroxide): SKU NRY-TRIG239 | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Cumyl Hydroperoxide Initiator) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 28 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 5.2 Organic Peroxide Type F (UN3109) | US Price: $295 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [OMG 6% Cobalt Naphthenate Cure Promoter Solution (Borchers / OMG Americas)](https://compositematrix.com/materials/omg-6-cobalt-naphthenate-cure-promoter-solution): SKU OMG-COBALT6-5G | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Cobalt Cure Accelerator) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 45 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 3 Flammable Liquid (UN1993) | US Price: $353 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [Owens Corning 1.5 oz Emulsion Chopped Strand Mat (CSM) (Owens Corning)](https://compositematrix.com/materials/owens-corning-1-5-oz-emulsion-chopped-strand-mat-csm): SKU OWC-CSM15OZ-50 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 320 MPa (46412 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 440 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $490 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Owens Corning 24 oz Woven Roving Marine E-Glass (Owens Corning)](https://compositematrix.com/materials/owens-corning-24-oz-woven-roving-marine-e-glass): SKU OWC-WR24OZ-50 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 580 MPa (84122 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 710 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $540 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Owens Corning Knytex DBM 1708 Advantex E-CR Biaxial (Owens Corning)](https://compositematrix.com/materials/owens-corning-knytex-dbm-1708-advantex-e-cr-biaxial): SKU OC-DBM1708-50IN | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-CR Stitched Multiaxial) | ASTM D638 Tensile: 2600 MPa (377099 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated (N/A) | US Price: $315 (65 yd Roll (50" Wide, 125 lbs)) | Drop-In Equivalents: Vectorply E-BXM 1708, Saertex U-E-868g
- [Polynt Armorcote 950 High-UV Marine ISO/NPG Gelcoat (Polynt Composites USA)](https://compositematrix.com/materials/polynt-armorcote-950-high-uv-marine-iso-npg-gelcoat): SKU POL-ARM950-DR | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (ISO/NPG Marine Gelcoat) | ASTM D638 Tensile: 74 MPa (10733 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 92 MPa | Viscosity: 15500 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $224 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [Polynt Dion 9500-500 Rubber-Toughened Dynamic VE (Polynt Composites USA)](https://compositematrix.com/materials/polynt-dion-9500-500-rubber-toughened-dynamic-ve): SKU POL-DION9500 | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 75 MPa (10878 psi) | ASTM D648 HDT: 86 °C | ASTM D790 Flexural: 137 MPa | Viscosity: 450 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2542 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Polynt Dion 9800-05A High-Crosslink Novolac VE (Polynt Composites USA)](https://compositematrix.com/materials/polynt-dion-9800-05a-high-crosslink-novolac-ve): SKU POL-DION9800 | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 79 MPa (11458 psi) | ASTM D648 HDT: 149 °C | ASTM D790 Flexural: 141 MPa | Viscosity: 380 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2809 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Polynt Dion FR-9300 Brominated Fire-Retardant VE (Polynt Composites USA)](https://compositematrix.com/materials/polynt-dion-fr-9300-brominated-fire-retardant-ve): SKU POL-DION-FR9300 | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 81 MPa (11748 psi) | ASTM D648 HDT: 109 °C | ASTM D790 Flexural: 143 MPa | Viscosity: 410 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2727 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Polynt Polylite 33750-10 Isophthalic Structural Laminating Resin (Polynt Composites USA)](https://compositematrix.com/materials/polynt-polylite-33750-10-isophthalic-structural-laminating-resin): SKU POL-33750-ISO | Category: [/categories/marine-isophthalic-polyesters](https://compositematrix.com/categories/marine-isophthalic-polyesters) (Isophthalic Polyester) | ASTM D638 Tensile: 72 MPa (10443 psi) | ASTM D648 HDT: 92 °C | ASTM D790 Flexural: 120 MPa | Viscosity: 480 cPs | Cure/Companions: MEKP 9% Active Oxygen Catalyst (1.25%–2.0%) + Marine ISO/NPG Gelcoat + 1.5 oz Chopped Strand Mat & 1708 Biaxial E-Glass | Processes: Open-Mold Spray-Up, Hand Layup, Closed-Mold Deck Infusion | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1620 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [Polynt Reichhold Dion 9100-700 Infusion Vinyl Ester (Polynt Composites USA)](https://compositematrix.com/materials/polynt-reichhold-dion-9100-700-infusion-vinyl-ester): SKU POL-DION9100-55DR | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Infusion Vinyl Ester) | ASTM D638 Tensile: 83 MPa (12038 psi) | ASTM D648 HDT: 105 °C | ASTM D790 Flexural: 145 MPa | Viscosity: 195 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1480 (204 kg (55 Gal Drum)) | Drop-In Equivalents: Interplastic CoREZYN CORVE8100, INEOS Derakane 411-200
- [Polynt Stypol 040-8086 Low-Profile DCPD Marine Polyester (Polynt Composites USA)](https://compositematrix.com/materials/polynt-stypol-040-8086-low-profile-dcpd-marine-polyester): SKU POL-STY8086-DR | Category: [/categories/marine-isophthalic-polyesters](https://compositematrix.com/categories/marine-isophthalic-polyesters) (Isophthalic Polyester) | ASTM D638 Tensile: 64 MPa (9282 psi) | ASTM D648 HDT: 78 °C | ASTM D790 Flexural: 112 MPa | Viscosity: 440 cPs | Cure/Companions: MEKP 9% Active Oxygen Catalyst (1.25%–2.0%) + Marine ISO/NPG Gelcoat + 1.5 oz Chopped Strand Mat & 1708 Biaxial E-Glass | Processes: Open-Mold Spray-Up, Hand Layup, Closed-Mold Deck Infusion | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1440 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [PRO-SET ADV-176 / ADV-276 Toughened Thixotropic Epoxy Paste (Gougeon Brothers (PRO-SET))](https://compositematrix.com/materials/pro-set-adv-176-adv-276-toughened-thixotropic-epoxy-paste): SKU PRO-ADV176-KIT | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Structural Epoxy Bonding Paste) | ASTM D638 Tensile: 44 MPa (6382 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 62 MPa | Viscosity: 95000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $450 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [PRO-SET HTP-124 High-Temperature Tooling Epoxy (Gougeon Brothers (PRO-SET))](https://compositematrix.com/materials/pro-set-htp-124-high-temperature-tooling-epoxy): SKU PRO-HTP124-5G | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 85 MPa (12328 psi) | ASTM D648 HDT: 142 °C | ASTM D790 Flexural: 129 MPa | Viscosity: 620 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $4280 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [PRO-SET INF-114 High-Tg Carbon Infusion Epoxy (Gougeon Brothers (PRO-SET))](https://compositematrix.com/materials/pro-set-inf-114-high-tg-carbon-infusion-epoxy): SKU PRO-INF114-DR | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Infusion Epoxy) | ASTM D638 Tensile: 82 MPa (11893 psi) | ASTM D648 HDT: 94 °C | ASTM D790 Flexural: 126 MPa | Viscosity: 230 cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3300 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [PRO-SET INF-210 Fast Cure Infusion Epoxy Hardener (Gougeon Brothers (PRO-SET))](https://compositematrix.com/materials/pro-set-inf-210-fast-cure-infusion-epoxy-hardener): SKU PRO-INF210-15G | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Cycloaliphatic Amine Hardener) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 32 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 8 Corrosive Polyamine (UN2735) | US Price: $276 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [PRO-SET INF-211 Medium Infusion Epoxy Hardener (Gougeon Brothers (PRO-SET))](https://compositematrix.com/materials/pro-set-inf-211-medium-infusion-epoxy-hardener): SKU PRO-INF211-15GAL | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Cycloaliphatic Amine Hardener) | ASTM D638 Tensile: 79 MPa (11458 psi) | ASTM D648 HDT: 91 °C | ASTM D790 Flexural: 126 MPa | Viscosity: 35 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 8 Corrosive Polyamine (UN2735) | US Price: $998 (52 kg Drum (15 Gal)) | Drop-In Equivalents: PRO-SET INF-210 Fast, PRO-SET INF-212 Slow
- [PRO-SET INF-212 Slow Tropical Infusion Epoxy Hardener (Gougeon Brothers (PRO-SET))](https://compositematrix.com/materials/pro-set-inf-212-slow-tropical-infusion-epoxy-hardener): SKU PRO-INF212-15G | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Cycloaliphatic Amine Hardener) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 38 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 8 Corrosive Polyamine (UN2735) | US Price: $282 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [PRO-SET INF-213 Extra-Slow Thick-Section Epoxy Hardener (Gougeon Brothers (PRO-SET))](https://compositematrix.com/materials/pro-set-inf-213-extra-slow-thick-section-epoxy-hardener): SKU PRO-INF213-15G | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Cycloaliphatic Amine Hardener) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 42 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 8 Corrosive Polyamine (UN2735) | US Price: $289 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [PRO-SET LAM-125 Medium Viscosity Laminating Epoxy (Gougeon Brothers (PRO-SET))](https://compositematrix.com/materials/pro-set-lam-125-medium-viscosity-laminating-epoxy): SKU PRO-LAM125-55G | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 78 MPa (11313 psi) | ASTM D648 HDT: 84 °C | ASTM D790 Flexural: 122 MPa | Viscosity: 780 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3120 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy (Gougeon Brothers (PRO-SET))](https://compositematrix.com/materials/pro-set-lam-135-low-viscosity-wet-out-epoxy): SKU PRO-LAM135-55G | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 80 MPa (11603 psi) | ASTM D648 HDT: 86 °C | ASTM D790 Flexural: 124 MPa | Viscosity: 490 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3180 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Scott Bader Crestabond M1-20 Primerless Methacrylate Adhesive (Scott Bader North America)](https://compositematrix.com/materials/scott-bader-crestabond-m1-20-primerless-methacrylate-adhesive): SKU SCB-CREST-M120 | Category: [/categories/gelcoats-bonding-pastes-tooling](https://compositematrix.com/categories/gelcoats-bonding-pastes-tooling) (Methacrylate Structural Adhesive) | ASTM D638 Tensile: 21 MPa (3046 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 39 MPa | Viscosity: 120000 cPs | Cure/Companions: Norox MEKP-925H Low-Hydrogen Peroxide Initiator (1.8%) + Vinyl Ester Skin-Coat Resin + Divinycell / Corecell Sandwich Cores | Processes: Airless / HVLP Spray, Pneumatic Meter-Mix Bonding, Mold Tooling | DOT 49 CFR: Class 3 Flammable Liquid (UN1133) | US Price: $536 (19 L Industrial Pail) | Drop-In Equivalents: ITW Plexus MA310, HK Research MaxGuard NP
- [Scott Bader Crystic 489PA Isophthalic Marine Hull Polyester (Scott Bader North America)](https://compositematrix.com/materials/scott-bader-crystic-489pa-isophthalic-marine-hull-polyester): SKU SCB-CRY489PA | Category: [/categories/marine-isophthalic-polyesters](https://compositematrix.com/categories/marine-isophthalic-polyesters) (Isophthalic Polyester) | ASTM D638 Tensile: 71 MPa (10298 psi) | ASTM D648 HDT: 90 °C | ASTM D790 Flexural: 119 MPa | Viscosity: 450 cPs | Cure/Companions: MEKP 9% Active Oxygen Catalyst (1.25%–2.0%) + Marine ISO/NPG Gelcoat + 1.5 oz Chopped Strand Mat & 1708 Biaxial E-Glass | Processes: Open-Mold Spray-Up, Hand Layup, Closed-Mold Deck Infusion | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $1643 (225 kg Steel Drum) | Drop-In Equivalents: Interplastic CoREZYN COR75-AQ-010, Polynt Polylite 33750-10
- [Scott Bader Crystic VE679PA Marine Infusion Skin VE (Scott Bader North America)](https://compositematrix.com/materials/scott-bader-crystic-ve679pa-marine-infusion-skin-ve): SKU SCB-VE679PA | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 83 MPa (12038 psi) | ASTM D648 HDT: 100 °C | ASTM D790 Flexural: 145 MPa | Viscosity: 260 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2235 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Sicomin SR 5550 Lloyd's Approved Structural Epoxy (Sicomin North America)](https://compositematrix.com/materials/sicomin-sr-5550-lloyd-s-approved-structural-epoxy): SKU SIC-SR5550-200KG | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 80 MPa (11603 psi) | ASTM D648 HDT: 87 °C | ASTM D790 Flexural: 124 MPa | Viscosity: 640 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3020 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Sicomin SR 8100 Low-Toxicity Marine Infusion Epoxy (Sicomin North America)](https://compositematrix.com/materials/sicomin-sr-8100-low-toxicity-marine-infusion-epoxy): SKU SIC-SR8100-200KG | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 76 MPa (11023 psi) | ASTM D648 HDT: 82 °C | ASTM D790 Flexural: 120 MPa | Viscosity: 215 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $2860 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Solvay Cycom 977-2 Toughened Aerospace Carbon Epoxy Prepreg (Syensqo / Solvay Composite Materials)](https://compositematrix.com/materials/solvay-cycom-977-2-toughened-aerospace-carbon-epoxy-prepreg): SKU SLV-CYC977-2 | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 2690 MPa (390152 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1760 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $6120 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Swancor 901 Bisphenol-A Epoxy Vinyl Ester (Swancor USA)](https://compositematrix.com/materials/swancor-901-bisphenol-a-epoxy-vinyl-ester): SKU SWN-901-VE | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Vinyl Ester) | ASTM D638 Tensile: 85 MPa (12328 psi) | ASTM D648 HDT: 105 °C | ASTM D790 Flexural: 147 MPa | Viscosity: 430 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2009 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [Swancor 907 Novolac Corrosion Vinyl Ester (Swancor USA)](https://compositematrix.com/materials/swancor-907-novolac-corrosion-vinyl-ester): SKU SWN-907-NVE | Category: [/categories/vinyl-ester-resins](https://compositematrix.com/categories/vinyl-ester-resins) (Vinyl Ester) | ASTM D638 Tensile: 78 MPa (11313 psi) | ASTM D648 HDT: 146 °C | ASTM D790 Flexural: 140 MPa | Viscosity: 370 cPs | Cure/Companions: Norox MEKP-925H Catalyst (1.5% by weight, UN3105) + Cobalt Octoate 6% Cure Promoter + Vectorply E-BXM 1708 Biaxial E-Glass | Processes: Vacuum Infusion (VIP / VARTM), Hand Layup, Filament Winding | DOT 49 CFR: Class 3 Flammable Liquid (UN1866) | US Price: $2583 (205 kg Drum) | Drop-In Equivalents: INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100
- [System Three SilverTip Marine Laminating Epoxy (System Three Resins)](https://compositematrix.com/materials/system-three-silvertip-marine-laminating-epoxy): SKU SYS3-SLVTIP-55G | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 75 MPa (10878 psi) | ASTM D648 HDT: 76 °C | ASTM D790 Flexural: 119 MPa | Viscosity: 550 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3160 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [Teijin Tenax IMS65 24K Intermediate Modulus Carbon (Teijin Carbon America)](https://compositematrix.com/materials/teijin-tenax-ims65-24k-intermediate-modulus-carbon): SKU TEI-IMS65-24K | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 6000 MPa (870228 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1880 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $3555 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Toray Cetex TC1200 PEEK Thermoplastic Carbon Prepreg (Toray Advanced Composites)](https://compositematrix.com/materials/toray-cetex-tc1200-peek-thermoplastic-carbon-prepreg): SKU TOR-TC1200-PEEK | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 2410 MPa (349542 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1810 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $6525 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Toray Torayca M40J High-Modulus Pitch/PAN Carbon Fiber (Toray Composite Materials America)](https://compositematrix.com/materials/toray-torayca-m40j-high-modulus-pitch-pan-carbon-fiber): SKU TOR-M40J-6K | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 4400 MPa (638167 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1720 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $5760 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Toray Torayca T1000G Ultra-High Strength Aerospace Carbon (Toray Composite Materials America)](https://compositematrix.com/materials/toray-torayca-t1000g-ultra-high-strength-aerospace-carbon): SKU TOR-T1000G-12K | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 6370 MPa (923892 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1940 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $5040 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Toray Torayca T300 3K Standard Modulus Carbon Tow (Toray Composite Materials America)](https://compositematrix.com/materials/toray-torayca-t300-3k-standard-modulus-carbon-tow): SKU TOR-T300-3K | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Carbon Fiber & Prepreg) | ASTM D638 Tensile: 3530 MPa (511984 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1580 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $1778 (100 yd Roll (45 kg)) | Drop-In Equivalents: Hexcel HexForce 282, Toray Torayca T700S
- [Toray Torayca T700S 12K Unidirectional Carbon Fabric (Toray Composite Materials America)](https://compositematrix.com/materials/toray-torayca-t700s-12k-unidirectional-carbon-fabric): SKU TOR-T700S-300GSM | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (12K Unidirectional Carbon) | ASTM D638 Tensile: 4900 MPa (710686 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated (N/A) | US Price: $2680 (100 yd Roll (50" Wide, 300 gsm)) | Drop-In Equivalents: Hexcel IM7 / AS4C 12K, Mitsubishi Pyrofil TR50S 12K
- [Toray Torayca T800S Intermediate Modulus Carbon Fiber (Toray Composite Materials America)](https://compositematrix.com/materials/toray-torayca-t800s-intermediate-modulus-carbon-fiber): SKU TOR-T800S-24K | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (Intermediate Modulus Carbon) | ASTM D638 Tensile: 5880 MPa (852823 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1850 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $314 (4 kg Spool Case) | Drop-In Equivalents: Hexcel HexTow IM7, Mitsubishi Pyrofil MR70
- [United Initiators Benox B-50 Dibenzoyl Peroxide Paste (United Initiators)](https://compositematrix.com/materials/united-initiators-benox-b-50-dibenzoyl-peroxide-paste): SKU UIN-BENOXB50 | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (BPO Peroxide Initiator) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 8500 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 5.2 Organic Peroxide Type E (UN3108) | US Price: $252 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [United Initiators Norox MCP-75 Cumyl Hydroperoxide Blend (United Initiators)](https://compositematrix.com/materials/united-initiators-norox-mcp-75-cumyl-hydroperoxide-blend): SKU UIN-MCP75-CASE | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Low-Exotherm Peroxide Initiator) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 22 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 5.2 Organic Peroxide Type D (UN3105) | US Price: $262 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [United Initiators Norox MEKP-925H Low-H2O2 Catalyst (United Initiators)](https://compositematrix.com/materials/united-initiators-norox-mekp-925h-low-h2o2-catalyst): SKU UI-NRX925H-4X8LB | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Organic Peroxide Initiator) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 22 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 5.2 Organic Peroxide (UN3105) | US Price: $182 (4 x 8 lb Case (14.5 kg)) | Drop-In Equivalents: Nouryon Cadox L-50a, Arkema Luperox DDM-9
- [United Initiators Norox MEKP-9 Industry Standard Peroxide (United Initiators)](https://compositematrix.com/materials/united-initiators-norox-mekp-9-industry-standard-peroxide): SKU UIN-MEKP9-CASE | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (MEKP Peroxide Initiator) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 19 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 5.2 Organic Peroxide Type D (UN3105) | US Price: $213 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [Vectorply C-LA 1810 Carbon / Kevlar Aramid Hybrid Multiaxial (Vectorply Corporation)](https://compositematrix.com/materials/vectorply-c-la-1810-carbon-kevlar-aramid-hybrid-multiaxial): SKU VEC-CLA1810-50 | Category: [/categories/carbon-fiber-fabrics-prepregs](https://compositematrix.com/categories/carbon-fiber-fabrics-prepregs) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 1650 MPa (239313 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 1240 MPa | Viscosity: Solid cPs | Cure/Companions: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564) + Stoichiometric Amine Hardener + Nylon Peel Ply & High-Temp Vacuum Film | Processes: Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $3800 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Vectorply E-BX 1200 Stitched (+/-45) Double Bias E-Glass (Vectorply Corporation)](https://compositematrix.com/materials/vectorply-e-bx-1200-stitched-45-double-bias-e-glass): SKU VEC-EBX1200-50 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 685 MPa (99351 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 830 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $635 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Vectorply® E-BXM 1708 Biaxial E-Glass (Vectorply Corp)](https://compositematrix.com/materials/vectorply-e-bxm-1708): SKU VEC-1708-50IN-ROLL | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (Marine Fiberglass) | ASTM D638 Tensile: 3102.6 MPa (450000 psi) | ASTM D648 HDT: 232.2 °C | ASTM D790 Flexural: 4498.8 MPa | Viscosity: 805 cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Hazmat Standard Freight (N/A) | US Price: $315 (65-Yd Roll (50 in Width)) | Drop-In Equivalents: Saertex® / Owens Corning 1708 Stitched Biaxial
- [Vectorply E-LT 2400 Unidirectional + Transverse Infusion Glass (Vectorply Corporation)](https://compositematrix.com/materials/vectorply-e-lt-2400-unidirectional-transverse-infusion-glass): SKU VEC-ELT2400-50 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 780 MPa (113130 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 910 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $680 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Vectorply E-LTM 1808 Stitched Biaxial (0/90) + Mat E-Glass (Vectorply Corporation)](https://compositematrix.com/materials/vectorply-e-ltm-1808-stitched-biaxial-0-90-mat-e-glass): SKU VEC-ELTM1808-50 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 660 MPa (95725 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 810 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $650 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Vectorply E-QX 3600 Quadraxial (0/+45/90/-45) Heavy Marine Glass (Vectorply Corporation)](https://compositematrix.com/materials/vectorply-e-qx-3600-quadraxial-0-45-90-45-heavy-marine-glass): SKU VEC-EQX3600-50 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 745 MPa (108053 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 890 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $710 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Vectorply E-TLX 2400 Triaxial (+45/90/-45) Structural E-Glass (Vectorply Corporation)](https://compositematrix.com/materials/vectorply-e-tlx-2400-triaxial-45-90-45-structural-e-glass): SKU VEC-ETLX2400-50 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 720 MPa (104427 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 860 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $690 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Vectorply K-BX 1200 DuPont Kevlar 49 Stitched Biaxial (+/-45) (Vectorply Corporation)](https://compositematrix.com/materials/vectorply-k-bx-1200-dupont-kevlar-49-stitched-biaxial-45): SKU VEC-KBX1200-50 | Category: [/categories/e-glass-multiaxial-aramid](https://compositematrix.com/categories/e-glass-multiaxial-aramid) (E-Glass & Aramid Multiaxial) | ASTM D638 Tensile: 1420 MPa (205954 psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: 980 MPa | Viscosity: Solid cPs | Cure/Companions: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP) + Norox MEKP-925H Catalyst (1.5%) + Divinycell H80 / Corecell M80 Sandwich Core | Processes: Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion | DOT 49 CFR: Non-Regulated Industrial Fiber (N/A) | US Price: $4250 (100 kg Roll (50 in)) | Drop-In Equivalents: Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708
- [Vipel® F010-SER Epoxy Novolac (AOC Resins)](https://compositematrix.com/materials/vipel-f010-ser): SKU AOC-VIPEL-F010-55G | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Vinyl Ester) | ASTM D638 Tensile: 86.2 MPa (12500 psi) | ASTM D648 HDT: 140.6 °C | ASTM D790 Flexural: 125 MPa | Viscosity: 320 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: US DOT Class 3 (UN1866 Flammable Liquid) (UN1866) | US Price: $1720 (55-Gal Drum (460 lbs)) | Drop-In Equivalents: Ashland Derakane™ 470-300
- [WEST SYSTEM 105-B Marine Grade Epoxy Resin (Gougeon Brothers (WEST SYSTEM))](https://compositematrix.com/materials/west-system-105-b-marine-grade-epoxy-resin): SKU WST-105B-5GAL | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Infusion Epoxy) | ASTM D638 Tensile: 73 MPa (10588 psi) | ASTM D648 HDT: 68 °C | ASTM D790 Flexural: 117 MPa | Viscosity: 975 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Class 9 Environmentally Hazardous (UN3082) | US Price: $3240 (200 kg Drum Kit) | Drop-In Equivalents: PRO-SET INF-114, Gurit Prime 37
- [West System® 105 Epoxy Resin (Gougeon Brothers)](https://compositematrix.com/materials/west-system-105): SKU GOU-WS105-55G | Category: [/categories/structural-infusion-epoxies](https://compositematrix.com/categories/structural-infusion-epoxies) (Marine Epoxy) | ASTM D638 Tensile: 53.8 MPa (7800 psi) | ASTM D648 HDT: 53.3 °C | ASTM D790 Flexural: 78 MPa | Viscosity: 975 cPs | Cure/Companions: Matched Stoichiometric Amine Hardener (100:28 pbw) + Carbon Fiber 3K/12K or E-CR Glass Fabrics + Peel Ply, Flow Media & Vacuum Bagging Film | Processes: Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C | DOT 49 CFR: Non-Regulated Ground / Class 8 Hardener (N/A) | US Price: $1950 (55-Gal Drum) | Drop-In Equivalents: System Three SilverTip® / PRO-SET Laminating Epoxy
- [WEST SYSTEM 206-B Slow Marine Epoxy Hardener (Gougeon Brothers (WEST SYSTEM))](https://compositematrix.com/materials/west-system-206-b-slow-marine-epoxy-hardener): SKU WST-206B-1GAL | Category: [/categories/catalysts-curatives-hardeners](https://compositematrix.com/categories/catalysts-curatives-hardeners) (Polyamine Epoxy Hardener) | ASTM D638 Tensile: N/A MPa (N/A psi) | ASTM D648 HDT: N/A °C | ASTM D790 Flexural: N/A MPa | Viscosity: 120 cPs | Cure/Companions: Marine & Novolac Vinyl Ester Resins (1.25%–2.0% MEKP) + Isophthalic Marine Polyester Resins + ISO/NPG Marine Gelcoats | Processes: Metered Catalyst Dispensing, Closed-Mold Vacuum Infusion, Hand Layup | DOT 49 CFR: Class 8 Corrosive Polyamine (UN2735) | US Price: $302 (4 x 3.6 kg Hazmat Case) | Drop-In Equivalents: United Initiators Norox MEKP-925H, Nouryon Butanox M-50
- [Wrightlon® 7400 High-Elongation Bagging Film (Airtech Advanced)](https://compositematrix.com/materials/wrightlon-7400): SKU AIR-WL7400-120IN | Category: [/categories/vacuum-infusion-bagging-consumables](https://compositematrix.com/categories/vacuum-infusion-bagging-consumables) (Vacuum Consumable) | ASTM D638 Tensile: 55.2 MPa (8000 psi) | ASTM D648 HDT: 204.4 °C | ASTM D790 Flexural: 80 MPa | Viscosity: 0 cPs | Cure/Companions: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply + HDPE Resin Flow Media & Spiral Tubing | Processes: Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk | DOT 49 CFR: Non-Hazmat Standard Freight (N/A) | US Price: $490 (Roll (120 in Width)) | Drop-In Equivalents: Syensqo Aerovac® VacFilm 450V