Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder

Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder by Airtech Advanced Materials (SKU: AIR-AIRWV-N10) provides an ASTM D638 Tensile Strength of 18 MPa (2,611 psi), ASTM D648 Heat Deflection Temperature (HDT) of 204 °C (399 °F), ASTM D790 Flexural Strength of N/A, and Brookfield viscosity of solid reinforcement/core state.

Required companion cure and process materials for Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder include: Butyl Vacuum Sealant Tape (GS-213-3), Perforated Release Film & Peel Ply, HDPE Resin Flow Media & Spiral Tubing. Category Engineering Rule: COMPLETE INFUSION STACK: Laminate → Peel Ply (85 gsm Nylon) → Perforated Release Film → HDPE Spiral Flow Media → Spiral Tubing & Omega Channels → Butyl Tacky Tape → Nylon Vacuum Film.

Approved cross-referenced drop-in equivalents for Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder in the North American ASTM index include Airtech Wrightlon 7400, Airtech Greenflow 75. Direct head-to-head engineering comparisons are available against Wrightlon® 7400 High-Elongation Bagging Film, Airtech Greenflow 75 High-Speed Extruded Resin Flow Media, Airtech GS-213-3 High-Tack Vacuum Bag Sealant Tape (Tacky Tape).

Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder is classified under US DOT 49 CFR and Transport Canada TDG as Non-Regulated Industrial Consumable (UN Number: N/A). It ships from regional US hubs in Huntington Beach, CA, Springfield, TN, Tampa, FL with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Airtech Airweave N10 Non-Woven Polyester Breather & Bleeder is qualified for Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk. Primary industrial applications include VIP / VARTM Resin Infusion, Out-of-Autoclave Prepreg Consolidation.