Chomarat C-WEAVE 200T 3K Carbon Twill

Chomarat C-WEAVE 200T 3K Carbon Twill by Chomarat (SKU: CHO-CW200T-50IN) provides an ASTM D638 Tensile Strength of 4100 MPa (594,656 psi), ASTM D648 Heat Deflection Temperature (HDT) of ambient cure rating, ASTM D790 Flexural Strength of N/A, and Brookfield viscosity of solid reinforcement/core state.

Required companion cure and process materials for Chomarat C-WEAVE 200T 3K Carbon Twill include: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564), Stoichiometric Amine Hardener, Nylon Peel Ply & High-Temp Vacuum Film. Category Engineering Rule: SIZE COMPATIBILITY: Use Epoxy-compatible silane sizing with Structural Epoxy Resins (approx. 55:45 fiber-to-resin weight ratio in vacuum infusion). ITAR/EAR export screening applies.

Approved cross-referenced drop-in equivalents for Chomarat C-WEAVE 200T 3K Carbon Twill in the North American ASTM index include Hexcel HexForce 282 3K, Toray T300 3K 2x2 Twill. Direct head-to-head engineering comparisons are available against HexForce® 282 3K Plain Weave Carbon, Chomarat C-Weave 200T 3K 2x2 Twill Carbon Fabric, Hexcel HexForce G0926 6K 5HS Satin Carbon Fabric (370 gsm).

Chomarat C-WEAVE 200T 3K Carbon Twill is classified under US DOT 49 CFR and Transport Canada TDG as Non-Regulated (UN Number: N/A). It ships from regional US hubs in Anderson, SC, Mira Loma, CA, Minneapolis, MN with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Chomarat C-WEAVE 200T 3K Carbon Twill is qualified for Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag. Primary industrial applications include Aerospace Fairings, Defense UAV Skins, Motorsport Monocoques.