CoREZYN® CORVE8100 Infusion Resin
CoREZYN® CORVE8100 Infusion Resin by Interplastic Corp is an industrial Vinyl Ester (Resins) with ASTM D638 Tensile Strength of 81.4 MPa (11,800 psi), ASTM D648 HDT of 105 °C (221°F), and US DOT classification US DOT Class 3 (UN1866 Resin Solution). Approved drop-in substitute: AOC Vipel® F010-SER / Derakane 411-350 (96.2% match).
Normalized ASTM Technical Parameters (SI & US Imperial)
pgvector HNSW Indexed| ASTM D638 Tensile Strength | 81.4 MPa (11,800 psi) |
| ASTM D648 Heat Deflection Temp (HDT) | 105 °C (221 °F) |
| ASTM D790 Flexural Strength | 118 MPa |
| ASTM D2583 Barcol Hardness | 35 |
| ASTM D2196 Brookfield Viscosity @ 25°C | 175 cPs |
| ASTM D792 Specific Density | 1120 kg/m³ |
| US DOT 49 CFR & Canada TDG Hazmat Class | US DOT Class 3 (UN1866 Resin Solution) • UN: UN1866 |
| Unit Price & B2B Pack Configuration | $7.4/kg • $1,480 per 55-Gal Drum (450 lbs) |
Compare CoREZYN® CORVE8100 Infusion Resin vs. Drop-In Equivalents
Published TDS Drop-In Equivalents: AOC Vipel® F010-SER / Derakane 411-350. Select any verified peer below for a complete side-by-side ASTM D638/D648 delta, cure stoichiometry, and US DOT 49 CFR comparison:
Required Companion Cure Stack, Processes & Applications
Category Hub: Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) →Mandatory Companion Materials:
Compatible Fabrication Processes:
Primary Marine, Aerospace & Industrial Applications:
Engineering FAQ: CoREZYN® CORVE8100 Infusion Resin (ASTM & Cure Specification)
1. What are the ASTM D638 Tensile Strength and ASTM D648 HDT specifications of CoREZYN® CORVE8100 Infusion Resin?▼
CoREZYN® CORVE8100 Infusion Resin by Interplastic Corp (SKU: INT-CORVE8100-55G) provides an ASTM D638 Tensile Strength of 81.4 MPa (11,800 psi), ASTM D648 Heat Deflection Temperature (HDT) of 105 °C (221 °F), ASTM D790 Flexural Strength of 118 MPa, and Brookfield viscosity of 175 cPs.
2. What catalyst or hardener and mix ratio are required for CoREZYN® CORVE8100 Infusion Resin?▼
Required companion cure and process materials for CoREZYN® CORVE8100 Infusion Resin include: Structural Core-Bonding Putty (0.55 kg/m² kerf fill), Marine Vinyl Ester or Infusion Epoxy Matrix, Vectorply 1708 E-Glass / Carbon Skin Plies. Category Engineering Rule: CORE BEDDING & RESIN UPTAKE: Grid-scored (GS) or grooved/perforated (GP) sheets require ~0.55 kg/m² extra resin for kerf/groove filling or a dedicated structural core-bonding putty.
3. What are the verified US drop-in equivalents for CoREZYN® CORVE8100 Infusion Resin?▼
Approved cross-referenced drop-in equivalents for CoREZYN® CORVE8100 Infusion Resin in the North American ASTM index include AOC Vipel® F010-SER / Derakane 411-350. Direct head-to-head engineering comparisons are available against Vipel® F010-SER Epoxy Novolac, INEOS Derakane Signia 411-350 Low-Odor Marine Vinyl Ester, Interplastic CoREZYN COR75-AQ-010 Lloyd's Marine Iso Polyester.
4. What is the US DOT 49 CFR and Transport Canada TDG Hazmat classification for CoREZYN® CORVE8100 Infusion Resin?▼
CoREZYN® CORVE8100 Infusion Resin is classified under US DOT 49 CFR and Transport Canada TDG as US DOT Class 3 (UN1866 Resin Solution) (UN Number: UN1866). It ships from regional US hubs in FL, TX, IN, SC with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.
5. Which composite molding methods (Vacuum Infusion, Hand Layup, RTM) suit CoREZYN® CORVE8100 Infusion Resin?▼
CoREZYN® CORVE8100 Infusion Resin is qualified for Vacuum Infusion (Grid-Scored / Grooved & Perforated), Vacuum Bag Core Bedding. Primary industrial applications include Bisphenol-A epoxy-based vinyl ester for marine vacuum infusion, Vinyl Ester.
Structural Sandwich Cores (PVC, SAN, PET Foam & End-Grain Balsa) (CAT-CORE-SW)
Closed-cell cross-linked PVC, high-elongation SAN polymer foams, recyclable PET cores, and kiln-dried end-grain balsa engineered to maximize flexural stiffness-to-weight ratio.
Explore All CAT-CORE-SW Materials →Authorized US Distributors Stocking This SKU
CompositeMatrix ASTM Index (2026). "CoREZYN® CORVE8100 Infusion Resin (INT-CORVE8100-55G) Normalized Technical Datasheet." Retrieved from https://compositematrix.com/materials/corezyn-corve8100