Hexion EPIKOTE Resin MGS RIMR 135

Hexion EPIKOTE Resin MGS RIMR 135 by Hexion (SKU: HEX-RIMR135-DRUM) provides an ASTM D638 Tensile Strength of 76 MPa (11,023 psi), ASTM D648 Heat Deflection Temperature (HDT) of 86 °C (187 °F), ASTM D790 Flexural Strength of 122 MPa, and Brookfield viscosity of 280 cPs.

Required companion cure and process materials for Hexion EPIKOTE Resin MGS RIMR 135 include: Matched Stoichiometric Amine Hardener (100:28 pbw), Carbon Fiber 3K/12K or E-CR Glass Fabrics, Peel Ply, Flow Media & Vacuum Bagging Film. Category Engineering Rule: STOICHIOMETRIC RATIO CRITICAL: Must be weighed strictly at manufacturer mix ratio (e.g., 100:28 or 100:34 by weight) with matched Amine Hardener. Requires post-cure at 60–80°C for full Tg.

Approved cross-referenced drop-in equivalents for Hexion EPIKOTE Resin MGS RIMR 135 in the North American ASTM index include Gurit Prime 37, Huntsman Araldite LY 1564. Direct head-to-head engineering comparisons are available against Gurit Prime 37 Infusion Epoxy System, Huntsman Araldite LY 1564 SP Infusion Epoxy Resin, Gurit Prime 27 Ultra-Low Viscosity Infusion Epoxy.

Hexion EPIKOTE Resin MGS RIMR 135 is classified under US DOT 49 CFR and Transport Canada TDG as Class 9 Environmentally Hazardous (UN Number: UN3082). It ships from regional US hubs in Houston, TX, Mira Loma, CA, Minneapolis, MN with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Hexion EPIKOTE Resin MGS RIMR 135 is qualified for Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C. Primary industrial applications include Marine Spar Infusion, Aerospace Radomes, Wind Turbine Shells.