INEOS Derakane 470-36 High-Temp Epoxy Novolac Vinyl Ester

INEOS Derakane 470-36 High-Temp Epoxy Novolac Vinyl Ester by INEOS Composites US (SKU: INE-DRK-470-36-DR) provides an ASTM D638 Tensile Strength of 78 MPa (11,313 psi), ASTM D648 Heat Deflection Temperature (HDT) of 152 °C (306 °F), ASTM D790 Flexural Strength of 142 MPa, and Brookfield viscosity of 360 cPs.

Required companion cure and process materials for INEOS Derakane 470-36 High-Temp Epoxy Novolac Vinyl Ester include: Matched Stoichiometric Amine Hardener (100:28 pbw), Carbon Fiber 3K/12K or E-CR Glass Fabrics, Peel Ply, Flow Media & Vacuum Bagging Film. Category Engineering Rule: STOICHIOMETRIC RATIO CRITICAL: Must be weighed strictly at manufacturer mix ratio (e.g., 100:28 or 100:34 by weight) with matched Amine Hardener. Requires post-cure at 60–80°C for full Tg.

Approved cross-referenced drop-in equivalents for INEOS Derakane 470-36 High-Temp Epoxy Novolac Vinyl Ester in the North American ASTM index include Derakane 470-300, AOC Vipel K022. Direct head-to-head engineering comparisons are available against INEOS Derakane Signia 470-300 Novolac Vinyl Ester, AOC Vipel K022 Novolac High-Temp Vinyl Ester, PRO-SET HTP-124 High-Temperature Tooling Epoxy.

INEOS Derakane 470-36 High-Temp Epoxy Novolac Vinyl Ester is classified under US DOT 49 CFR and Transport Canada TDG as Class 3 Flammable Liquid (UN Number: UN1866). It ships from regional US hubs in Dublin, OH, Houston, TX, Jacksonville, FL with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

INEOS Derakane 470-36 High-Temp Epoxy Novolac Vinyl Ester is qualified for Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C. Primary industrial applications include USCG Hull Skin Coat, FGD Chemical Scrubbers, Offshore Piping.