PRO-SET INF-114 High-Tg Carbon Infusion Epoxy

PRO-SET INF-114 High-Tg Carbon Infusion Epoxy by Gougeon Brothers (PRO-SET) (SKU: PRO-INF114-DR) provides an ASTM D638 Tensile Strength of 82 MPa (11,893 psi), ASTM D648 Heat Deflection Temperature (HDT) of 94 °C (201 °F), ASTM D790 Flexural Strength of 126 MPa, and Brookfield viscosity of 230 cPs.

Required companion cure and process materials for PRO-SET INF-114 High-Tg Carbon Infusion Epoxy include: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564), Stoichiometric Amine Hardener, Nylon Peel Ply & High-Temp Vacuum Film. Category Engineering Rule: SIZE COMPATIBILITY: Use Epoxy-compatible silane sizing with Structural Epoxy Resins (approx. 55:45 fiber-to-resin weight ratio in vacuum infusion). ITAR/EAR export screening applies.

Approved cross-referenced drop-in equivalents for PRO-SET INF-114 High-Tg Carbon Infusion Epoxy in the North American ASTM index include PRO-SET INF-114, Gurit Prime 37. Direct head-to-head engineering comparisons are available against PRO-SET INF-210 Fast Cure Infusion Epoxy Hardener, Gurit Prime 37 Infusion Epoxy System, Hexcel HexForce 7500 10 oz Boatbuilding Woven E-Glass Cloth.

PRO-SET INF-114 High-Tg Carbon Infusion Epoxy is classified under US DOT 49 CFR and Transport Canada TDG as Class 9 Environmentally Hazardous (UN Number: UN3082). It ships from regional US hubs in Bay City, MI, Tampa, FL, Seattle, WA with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

PRO-SET INF-114 High-Tg Carbon Infusion Epoxy is qualified for Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag. Primary industrial applications include Carbon America's Cup Foils, Aerospace UAV Spars, Naval Minehunter Decks.