Swancor 901 Bisphenol-A Epoxy Vinyl Ester

Swancor 901 Bisphenol-A Epoxy Vinyl Ester by Swancor USA (SKU: SWN-901-VE) provides an ASTM D638 Tensile Strength of 85 MPa (12,328 psi), ASTM D648 Heat Deflection Temperature (HDT) of 105 °C (221 °F), ASTM D790 Flexural Strength of 147 MPa, and Brookfield viscosity of 430 cPs.

Required companion cure and process materials for Swancor 901 Bisphenol-A Epoxy Vinyl Ester include: Matched Stoichiometric Amine Hardener (100:28 pbw), Carbon Fiber 3K/12K or E-CR Glass Fabrics, Peel Ply, Flow Media & Vacuum Bagging Film. Category Engineering Rule: STOICHIOMETRIC RATIO CRITICAL: Must be weighed strictly at manufacturer mix ratio (e.g., 100:28 or 100:34 by weight) with matched Amine Hardener. Requires post-cure at 60–80°C for full Tg.

Approved cross-referenced drop-in equivalents for Swancor 901 Bisphenol-A Epoxy Vinyl Ester in the North American ASTM index include INEOS Derakane 411-350, Interplastic CoREZYN CORVE8100. Direct head-to-head engineering comparisons are available against INEOS Derakane Signia 411-350 Low-Odor Marine Vinyl Ester, CoREZYN® CORVE8100 Infusion Resin, Hexion EPON Resin 862 Low-Viscosity Bisphenol-F Epoxy.

Swancor 901 Bisphenol-A Epoxy Vinyl Ester is classified under US DOT 49 CFR and Transport Canada TDG as Class 3 Flammable Liquid (UN Number: UN1866). It ships from regional US hubs in Tampa, FL, Houston, TX, Minneapolis, MN with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Swancor 901 Bisphenol-A Epoxy Vinyl Ester is qualified for Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C. Primary industrial applications include Marine Hull Blister Barrier, Slurry Ducting, Naval Transom Core Bonding.