Toray Cetex TC1200 PEEK Thermoplastic Carbon Prepreg

Toray Cetex TC1200 PEEK Thermoplastic Carbon Prepreg by Toray Advanced Composites (SKU: TOR-TC1200-PEEK) provides an ASTM D638 Tensile Strength of 2410 MPa (349,542 psi), ASTM D648 Heat Deflection Temperature (HDT) of ambient cure rating, ASTM D790 Flexural Strength of 1810 MPa, and Brookfield viscosity of solid reinforcement/core state.

Required companion cure and process materials for Toray Cetex TC1200 PEEK Thermoplastic Carbon Prepreg include: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564), Stoichiometric Amine Hardener, Nylon Peel Ply & High-Temp Vacuum Film. Category Engineering Rule: SIZE COMPATIBILITY: Use Epoxy-compatible silane sizing with Structural Epoxy Resins (approx. 55:45 fiber-to-resin weight ratio in vacuum infusion). ITAR/EAR export screening applies.

Approved cross-referenced drop-in equivalents for Toray Cetex TC1200 PEEK Thermoplastic Carbon Prepreg in the North American ASTM index include Hexcel HexForce 282, Toray Torayca T700S. Direct head-to-head engineering comparisons are available against HexForce® 282 3K Plain Weave Carbon, Toray Torayca T700S 12K Unidirectional Carbon Fabric, Solvay Cycom 977-2 Toughened Aerospace Carbon Epoxy Prepreg.

Toray Cetex TC1200 PEEK Thermoplastic Carbon Prepreg is classified under US DOT 49 CFR and Transport Canada TDG as Non-Regulated Industrial Fiber (UN Number: N/A). It ships from regional US hubs in Tacoma, WA, Stamford, CT, Anderson, SC with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Toray Cetex TC1200 PEEK Thermoplastic Carbon Prepreg is qualified for Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag. Primary industrial applications include FAA Part 23 Airframes, America's Cup Hydrofoils, Carbon Drive Shafts.