Toray Torayca T300 3K Standard Modulus Carbon Tow

Toray Torayca T300 3K Standard Modulus Carbon Tow by Toray Composite Materials America (SKU: TOR-T300-3K) provides an ASTM D638 Tensile Strength of 3530 MPa (511,984 psi), ASTM D648 Heat Deflection Temperature (HDT) of ambient cure rating, ASTM D790 Flexural Strength of 1580 MPa, and Brookfield viscosity of solid reinforcement/core state.

Required companion cure and process materials for Toray Torayca T300 3K Standard Modulus Carbon Tow include: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564), Stoichiometric Amine Hardener, Nylon Peel Ply & High-Temp Vacuum Film. Category Engineering Rule: SIZE COMPATIBILITY: Use Epoxy-compatible silane sizing with Structural Epoxy Resins (approx. 55:45 fiber-to-resin weight ratio in vacuum infusion). ITAR/EAR export screening applies.

Approved cross-referenced drop-in equivalents for Toray Torayca T300 3K Standard Modulus Carbon Tow in the North American ASTM index include Hexcel HexForce 282, Toray Torayca T700S. Direct head-to-head engineering comparisons are available against HexForce® 282 3K Plain Weave Carbon, Toray Torayca T700S 12K Unidirectional Carbon Fabric, Hexcel HexForce 3733 3K Plain Weave Carbon Fabric (197 gsm).

Toray Torayca T300 3K Standard Modulus Carbon Tow is classified under US DOT 49 CFR and Transport Canada TDG as Non-Regulated Industrial Fiber (UN Number: N/A). It ships from regional US hubs in Tacoma, WA, Stamford, CT, Anderson, SC with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Toray Torayca T300 3K Standard Modulus Carbon Tow is qualified for Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag. Primary industrial applications include FAA Part 23 Airframes, America's Cup Hydrofoils, Carbon Drive Shafts.