Toray Torayca T700S 12K Unidirectional Carbon Fabric

Toray Torayca T700S 12K Unidirectional Carbon Fabric by Toray Composite Materials America (SKU: TOR-T700S-300GSM) provides an ASTM D638 Tensile Strength of 4900 MPa (710,686 psi), ASTM D648 Heat Deflection Temperature (HDT) of ambient cure rating, ASTM D790 Flexural Strength of N/A, and Brookfield viscosity of solid reinforcement/core state.

Required companion cure and process materials for Toray Torayca T700S 12K Unidirectional Carbon Fabric include: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564), Stoichiometric Amine Hardener, Nylon Peel Ply & High-Temp Vacuum Film. Category Engineering Rule: SIZE COMPATIBILITY: Use Epoxy-compatible silane sizing with Structural Epoxy Resins (approx. 55:45 fiber-to-resin weight ratio in vacuum infusion). ITAR/EAR export screening applies.

Approved cross-referenced drop-in equivalents for Toray Torayca T700S 12K Unidirectional Carbon Fabric in the North American ASTM index include Hexcel IM7 / AS4C 12K, Mitsubishi Pyrofil TR50S 12K. Direct head-to-head engineering comparisons are available against Hexcel HexPly 8552 / IM7 Toughened Autoclave Epoxy Prepreg, Hexcel HexTow AS4 12K Aerospace Qualified Carbon Fiber, Mitsubishi Pyrofil TR50S 15K High-Strength Industrial Carbon.

Toray Torayca T700S 12K Unidirectional Carbon Fabric is classified under US DOT 49 CFR and Transport Canada TDG as Non-Regulated (UN Number: N/A). It ships from regional US hubs in Tacoma, WA, Santa Fe Springs, CA, Decatur, AL with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Toray Torayca T700S 12K Unidirectional Carbon Fabric is qualified for Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag. Primary industrial applications include COPV Hydrogen Pressure Vessels, Aerospace Primary Wing Spars, Hydrofoil Struts.