Toray Torayca T800S Intermediate Modulus Carbon Fiber

Toray Torayca T800S Intermediate Modulus Carbon Fiber by Toray Composite Materials America (SKU: TOR-T800S-24K) provides an ASTM D638 Tensile Strength of 5880 MPa (852,823 psi), ASTM D648 Heat Deflection Temperature (HDT) of ambient cure rating, ASTM D790 Flexural Strength of 1850 MPa, and Brookfield viscosity of solid reinforcement/core state.

Required companion cure and process materials for Toray Torayca T800S Intermediate Modulus Carbon Fiber include: Low-Viscosity Infusion Epoxy (Gurit Prime 37 / Hexion RIMR 135 / Araldite LY 1564), Stoichiometric Amine Hardener, Nylon Peel Ply & High-Temp Vacuum Film. Category Engineering Rule: SIZE COMPATIBILITY: Use Epoxy-compatible silane sizing with Structural Epoxy Resins (approx. 55:45 fiber-to-resin weight ratio in vacuum infusion). ITAR/EAR export screening applies.

Approved cross-referenced drop-in equivalents for Toray Torayca T800S Intermediate Modulus Carbon Fiber in the North American ASTM index include Hexcel HexTow IM7, Mitsubishi Pyrofil MR70. Direct head-to-head engineering comparisons are available against Hexcel HexTow IM7 12K Intermediate Modulus Carbon Fiber, Mitsubishi Pyrofil TR50S 15K High-Strength Industrial Carbon, Teijin Tenax IMS65 24K Intermediate Modulus Carbon.

Toray Torayca T800S Intermediate Modulus Carbon Fiber is classified under US DOT 49 CFR and Transport Canada TDG as Non-Regulated Industrial Fiber (UN Number: N/A). It ships from regional US hubs in Tacoma, WA, Decatur, AL with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Toray Torayca T800S Intermediate Modulus Carbon Fiber is qualified for Vacuum Assisted Resin Transfer (VARTM), Autoclave Prepreg Cure, Wet Layup + Vacuum Bag. Primary industrial applications include DOD eVTOL Wing Spars, COPV Hydrogen Vessels, Motorsport Monocoques.