Vectorply E-LT 2400 Unidirectional + Transverse Infusion Glass

Vectorply E-LT 2400 Unidirectional + Transverse Infusion Glass by Vectorply Corporation (SKU: VEC-ELT2400-50) provides an ASTM D638 Tensile Strength of 780 MPa (113,130 psi), ASTM D648 Heat Deflection Temperature (HDT) of ambient cure rating, ASTM D790 Flexural Strength of 910 MPa, and Brookfield viscosity of solid reinforcement/core state.

Required companion cure and process materials for Vectorply E-LT 2400 Unidirectional + Transverse Infusion Glass include: Marine Vinyl Ester Resin (~0.68 kg/m² per ply in VIP), Norox MEKP-925H Catalyst (1.5%), Divinycell H80 / Corecell M80 Sandwich Core. Category Engineering Rule: RESIN DEMAND FORMULA: 1708 Biaxial (25.5 oz/yd² total) absorbs ~0.95 kg of Vinyl Ester resin per m² per ply in hand layup, or ~0.68 kg/m² per ply under vacuum infusion.

Approved cross-referenced drop-in equivalents for Vectorply E-LT 2400 Unidirectional + Transverse Infusion Glass in the North American ASTM index include Vectorply E-LTM 1708, Owens Corning Knytex DBM 1708. Direct head-to-head engineering comparisons are available against Vectorply® E-BXM 1708 Biaxial E-Glass, Owens Corning Knytex DBM 1708 Advantex E-CR Biaxial, Vectorply E-QX 3600 Quadraxial (0/+45/90/-45) Heavy Marine Glass.

Vectorply E-LT 2400 Unidirectional + Transverse Infusion Glass is classified under US DOT 49 CFR and Transport Canada TDG as Non-Regulated Industrial Fiber (UN Number: N/A). It ships from regional US hubs in Phenix City, AL, Tampa, FL, Minneapolis, MN with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Vectorply E-LT 2400 Unidirectional + Transverse Infusion Glass is qualified for Vacuum Infusion (VIP), Hand Layup & Roller Consolidation, Pultrusion. Primary industrial applications include USCG Patrol Hull Laminates, Wind Blade Root Layup, Ballistic Spall Liners.