Vipel® F010-SER Epoxy Novolac

Vipel® F010-SER Epoxy Novolac by AOC Resins (SKU: AOC-VIPEL-F010-55G) provides an ASTM D638 Tensile Strength of 86.2 MPa (12,500 psi), ASTM D648 Heat Deflection Temperature (HDT) of 140.6 °C (285 °F), ASTM D790 Flexural Strength of 125 MPa, and Brookfield viscosity of 320 cPs.

Required companion cure and process materials for Vipel® F010-SER Epoxy Novolac include: Matched Stoichiometric Amine Hardener (100:28 pbw), Carbon Fiber 3K/12K or E-CR Glass Fabrics, Peel Ply, Flow Media & Vacuum Bagging Film. Category Engineering Rule: STOICHIOMETRIC RATIO CRITICAL: Must be weighed strictly at manufacturer mix ratio (e.g., 100:28 or 100:34 by weight) with matched Amine Hardener. Requires post-cure at 60–80°C for full Tg.

Approved cross-referenced drop-in equivalents for Vipel® F010-SER Epoxy Novolac in the North American ASTM index include Ashland Derakane™ 470-300. Direct head-to-head engineering comparisons are available against INEOS Derakane Signia 470-300 Novolac Vinyl Ester, PRO-SET HTP-124 High-Temperature Tooling Epoxy, Huntsman Araldite LY 5052 Cold-Cure Aerospace Epoxy.

Vipel® F010-SER Epoxy Novolac is classified under US DOT 49 CFR and Transport Canada TDG as US DOT Class 3 (UN1866 Flammable Liquid) (UN Number: UN1866). It ships from regional US hubs in OH, TX, GA, CA with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Vipel® F010-SER Epoxy Novolac is qualified for Vacuum Infusion (VARTM), Resin Transfer Molding (RTM), Post-Cure 60–80°C. Primary industrial applications include High-corrosion epoxy novolac vinyl ester with extreme thermal resistance, Vinyl Ester.