Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply vs. Airtech Wrightlon 5400 Nylon Vacuum Bagging Film
Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply (Airtech Advanced Materials) and Airtech Wrightlon 5400 Nylon Vacuum Bagging Film (Airtech Advanced Materials) achieve a 88.1% ASTM engineering compatibility score in Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes. Tensile strength delta is +9 MPa (+13.8%) and thermal HDT delta is +13 °C, making them qualified for direct drop-in substitution under standard cure schedules.
Side-by-Side ASTM Mechanical, Thermal, Rheological & Pricing Delta
| ASTM Parameter | A: Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply (Airtech Advanced Materials) | B: Airtech Wrightlon 5400 Nylon Vacuum Bagging Film (Airtech Advanced Materials) | Engineering Delta (A vs. B) |
|---|---|---|---|
| OEM Manufacturer & SKU | Airtech Advanced Materials • AIR-ECONO-60IN | Airtech Advanced Materials • AIR-WL5400-60IN | Same OEM Portfolio |
| ASTM D638 Tensile Strength (MPa / PSI) | 74 MPa (10,733 psi) | 65 MPa (9,427 psi) | +9 MPa (+13.8 %) |
| ASTM D648 Heat Deflection Temp (HDT °C / °F) | 190 °C (374 °F) | 177 °C (351 °F) | +13 °C (Verify Post-Cure) |
| ASTM D790 Flexural Strength (MPa) | N/A | N/A | N/A |
| ASTM D2583 Barcol Hardness | N/A | N/A | N/A |
| ASTM D2196 Brookfield Viscosity @ 25°C | Solid Reinforcement / Core | Solid Reinforcement / Core | Solid State |
| Gel Time @ 25°C (Minutes) | N/A | N/A | N/A |
| ASTM D792 Specific Density (kg/m³) | 1120 kg/m³ | 1130 kg/m³ | -10 kg/m³ |
| US DOT 49 CFR & TDG Hazmat Class | Non-Regulated Industrial Consumable (N/A) | Non-Regulated (N/A) | Identical (N/A) |
| Unit Price ($/kg USD) & Pack Price | $11.5/kg • $322 (100m Industrial Roll / Case) | $11.4/kg • $445 (500 ft Roll (60" Wide)) | +0.1 $/kg (+0.9 %) |
| US Stocking Warehouses | Huntington Beach, CA • Springfield, TN • Tampa, FL | Huntington Beach, CA • Tampa, FL • Minneapolis, MN | 1–3 Days LTL Dispatch |
Companion process stack: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply. Follow COMPLETE INFUSION STACK: Laminate → Peel Ply (85 gsm Nylon) → Perforated Release Film → HDPE Spiral Flow Media → Spiral Tubing & Omega Channels → Butyl Tacky Tape → Nylon Vacuum Film.
Post-Cure Schedule Adjustment Advised: ASTM D648 HDT differs by 13 °C (190 °C vs. 177 °C). For elevated-temperature tooling or dark-colored marine hulls, perform a 4–6 hour post-cure ramp at 60–80 °C (140–176 °F) to lock in full cross-link density.
Identical Hazmat Logistics Profile: Both SKUs ship under US DOT 49 CFR & Transport Canada TDG as Non-Regulated Industrial Consumable (UN Number: N/A). Note 49 CFR § 177.848 segregation if ordering with Class 5.2 Organic Peroxides (UN3105).
Engineering FAQ: Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply vs. Airtech Wrightlon 5400 Nylon Vacuum Bagging Film
1. Is Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply a direct drop-in equivalent for Airtech Wrightlon 5400 Nylon Vacuum Bagging Film?▼
Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply (Airtech Advanced Materials) and Airtech Wrightlon 5400 Nylon Vacuum Bagging Film (Airtech Advanced Materials) achieve a 88.1% ASTM engineering compatibility score in Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes. Tensile strength delta is +9 MPa (+13.8%) and thermal HDT delta is +13 °C, making them qualified for direct drop-in substitution under standard cure schedules.
2. What is the ASTM D638 Tensile Strength and ASTM D648 HDT difference between Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply and Airtech Wrightlon 5400 Nylon Vacuum Bagging Film?▼
Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply (Airtech Advanced Materials) delivers ASTM D638 Tensile Strength of 74 MPa (10,733 psi) and ASTM D648 HDT of 190 °C, whereas Airtech Wrightlon 5400 Nylon Vacuum Bagging Film (Airtech Advanced Materials) delivers 65 MPa (9,427 psi) and HDT of 177 °C. The net delta is +9 MPa (+13.8 %) tensile and +13 °C HDT.
3. Do Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply and Airtech Wrightlon 5400 Nylon Vacuum Bagging Film use the same catalyst or hardener cure system?▼
Companion process stack: Butyl Vacuum Sealant Tape (GS-213-3) + Perforated Release Film & Peel Ply. Follow COMPLETE INFUSION STACK: Laminate → Peel Ply (85 gsm Nylon) → Perforated Release Film → HDPE Spiral Flow Media → Spiral Tubing & Omega Channels → Butyl Tacky Tape → Nylon Vacuum Film. Post-Cure Schedule Adjustment Advised: ASTM D648 HDT differs by 13 °C (190 °C vs. 177 °C). For elevated-temperature tooling or dark-colored marine hulls, perform a 4–6 hour post-cure ramp at 60–80 °C (140–176 °F) to lock in full cross-link density.
4. How do US DOT 49 CFR Hazmat shipping rules and B2B drum/pack prices compare between Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply and Airtech Wrightlon 5400 Nylon Vacuum Bagging Film?▼
Identical Hazmat Logistics Profile: Both SKUs ship under US DOT 49 CFR & Transport Canada TDG as Non-Regulated Industrial Consumable (UN Number: N/A). Note 49 CFR § 177.848 segregation if ordering with Class 5.2 Organic Peroxides (UN3105). In US B2B distribution, Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply is priced at $322 per 100m Industrial Roll / Case ($11.5/kg) vs. $445 per 500 ft Roll (60" Wide) ($11.4/kg) for Airtech Wrightlon 5400 Nylon Vacuum Bagging Film (delta: +0.1 USD/kg).
Related Drop-In Comparisons in Vacuum Infusion Films, Peel Ply, Flow Media, Breathers & Sealant Tapes
Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply (Airtech Advanced Materials) and Airtech Wrightlon 5400 Nylon Vacuum Bagging Film (Airtech Advanced Materials) are trademarks of their respective owners. CompositeMatrix Technologies Inc. is an independent North American B2B composite material intelligence registry; comparative ASTM D638, D648, D790, D2583, and D2196 figures are presented under the US legal doctrine of Nominative Fair Use (Lanham Act, 15 U.S.C. § 1125) and Feist Publications, Inc. v. Rural Telephone Service Co. (499 U.S. 340) for scientific and industrial cross-reference. Cure schedules, exotherm behavior, and laminate qualification must be verified by a licensed Naval Architect or Professional Engineer (PE) against current manufacturer batch Technical Data Sheets (TDS) and Safety Data Sheets (SDS).