Airtech Wrightlon 5400 Nylon Vacuum Bagging Film

Airtech Wrightlon 5400 Nylon Vacuum Bagging Film by Airtech Advanced Materials (SKU: AIR-WL5400-60IN) provides an ASTM D638 Tensile Strength of 65 MPa (9,427 psi), ASTM D648 Heat Deflection Temperature (HDT) of 177 °C (351 °F), ASTM D790 Flexural Strength of N/A, and Brookfield viscosity of solid reinforcement/core state.

Required companion cure and process materials for Airtech Wrightlon 5400 Nylon Vacuum Bagging Film include: Butyl Vacuum Sealant Tape (GS-213-3), Perforated Release Film & Peel Ply, HDPE Resin Flow Media & Spiral Tubing. Category Engineering Rule: COMPLETE INFUSION STACK: Laminate → Peel Ply (85 gsm Nylon) → Perforated Release Film → HDPE Spiral Flow Media → Spiral Tubing & Omega Channels → Butyl Tacky Tape → Nylon Vacuum Film.

Approved cross-referenced drop-in equivalents for Airtech Wrightlon 5400 Nylon Vacuum Bagging Film in the North American ASTM index include Airtech Wrightlon 7400, VacPak NBF-540. Direct head-to-head engineering comparisons are available against Wrightlon® 7400 High-Elongation Bagging Film, Airtech Ipplon KM1300 Soft-Drape Marine Infusion Bagging Film, Airtech Econostitch 85 gsm Nylon Pin-Striped Peel Ply.

Airtech Wrightlon 5400 Nylon Vacuum Bagging Film is classified under US DOT 49 CFR and Transport Canada TDG as Non-Regulated (UN Number: N/A). It ships from regional US hubs in Huntington Beach, CA, Tampa, FL, Minneapolis, MN with a typical lead time of 1-3 Days. When ordered with Class 5.2 Organic Peroxides (MEKP UN3105), 49 CFR § 177.848 hazmat segregation applies.

Airtech Wrightlon 5400 Nylon Vacuum Bagging Film is qualified for Vacuum Infusion (VIP / VARTM), Autoclave Prepreg Cure, Vacuum Debulk. Primary industrial applications include Autoclave Prepreg Cure up to 177°C, Marine Resin Infusion.