PRO-SET INF-114 High-Tg Carbon Infusion Epoxy vs. PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy
PRO-SET INF-114 High-Tg Carbon Infusion Epoxy (Gougeon Brothers (PRO-SET)) and PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy (Gougeon Brothers (PRO-SET)) achieve a 68% ASTM engineering compatibility score in Carbon Fiber Fabrics (3K / 6K / 12K), Spread-Tow & Prepregs. Tensile strength delta is +2 MPa (+2.5%) and thermal HDT delta is +8 °C, making them interchangeable with post-cure temperature and viscosity flow adjustments.
Side-by-Side ASTM Mechanical, Thermal, Rheological & Pricing Delta
| ASTM Parameter | A: PRO-SET INF-114 High-Tg Carbon Infusion Epoxy (Gougeon Brothers (PRO-SET)) | B: PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy (Gougeon Brothers (PRO-SET)) | Engineering Delta (A vs. B) |
|---|---|---|---|
| OEM Manufacturer & SKU | Gougeon Brothers (PRO-SET) • PRO-INF114-DR | Gougeon Brothers (PRO-SET) • PRO-LAM135-55G | Same OEM Portfolio |
| ASTM D638 Tensile Strength (MPa / PSI) | 82 MPa (11,893 psi) | 80 MPa (11,603 psi) | +2 MPa (+2.5 %) |
| ASTM D648 Heat Deflection Temp (HDT °C / °F) | 94 °C (201 °F) | 86 °C (187 °F) | +8 °C (Verify Post-Cure) |
| ASTM D790 Flexural Strength (MPa) | 126 MPa | 124 MPa | +2 MPa (+1.6 %) |
| ASTM D2583 Barcol Hardness | 42 | 42 | 0 Barcol |
| ASTM D2196 Brookfield Viscosity @ 25°C | 230 cPs | 490 cPs | -260 cPs (-53.1 %) |
| Gel Time @ 25°C (Minutes) | 52 min | 52 min | 0 min |
| ASTM D792 Specific Density (kg/m³) | 1145 kg/m³ | 1145 kg/m³ | 0 kg/m³ |
| US DOT 49 CFR & TDG Hazmat Class | Class 9 Environmentally Hazardous (UN3082) | Class 9 Environmentally Hazardous (UN3082) | Identical (UN3082) |
| Unit Price ($/kg USD) & Pack Price | $16.5/kg • $3,300 (200 kg Drum Kit) | $15.9/kg • $3,180 (200 kg Drum Kit) | +0.6 $/kg (+3.8 %) |
| US Stocking Warehouses | Bay City, MI • Tampa, FL • Seattle, WA | Bay City, MI • Tampa, FL • Seattle, WA | 1–3 Days LTL Dispatch |
Both systems utilize stoichiometric Amine / Polyetheramine Hardeners. Verify exact mix ratio by weight (pbw) on the batch TDS before metering—never substitute hardeners across manufacturers without DSC glass-transition (Tg) qualification.
Post-Cure Schedule Adjustment Advised: ASTM D648 HDT differs by 8 °C (94 °C vs. 86 °C). For elevated-temperature tooling or dark-colored marine hulls, perform a 4–6 hour post-cure ramp at 60–80 °C (140–176 °F) to lock in full cross-link density.
Identical Hazmat Logistics Profile: Both SKUs ship under US DOT 49 CFR & Transport Canada TDG as Class 9 Environmentally Hazardous (UN Number: UN3082). Note 49 CFR § 177.848 segregation if ordering with Class 5.2 Organic Peroxides (UN3105).
Engineering FAQ: PRO-SET INF-114 High-Tg Carbon Infusion Epoxy vs. PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy
1. Is PRO-SET INF-114 High-Tg Carbon Infusion Epoxy a direct drop-in equivalent for PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy?▼
PRO-SET INF-114 High-Tg Carbon Infusion Epoxy (Gougeon Brothers (PRO-SET)) and PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy (Gougeon Brothers (PRO-SET)) achieve a 68% ASTM engineering compatibility score in Carbon Fiber Fabrics (3K / 6K / 12K), Spread-Tow & Prepregs. Tensile strength delta is +2 MPa (+2.5%) and thermal HDT delta is +8 °C, making them interchangeable with post-cure temperature and viscosity flow adjustments.
2. What is the ASTM D638 Tensile Strength and ASTM D648 HDT difference between PRO-SET INF-114 High-Tg Carbon Infusion Epoxy and PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy?▼
PRO-SET INF-114 High-Tg Carbon Infusion Epoxy (Gougeon Brothers (PRO-SET)) delivers ASTM D638 Tensile Strength of 82 MPa (11,893 psi) and ASTM D648 HDT of 94 °C, whereas PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy (Gougeon Brothers (PRO-SET)) delivers 80 MPa (11,603 psi) and HDT of 86 °C. The net delta is +2 MPa (+2.5 %) tensile and +8 °C HDT.
3. Do PRO-SET INF-114 High-Tg Carbon Infusion Epoxy and PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy use the same catalyst or hardener cure system?▼
Both systems utilize stoichiometric Amine / Polyetheramine Hardeners. Verify exact mix ratio by weight (pbw) on the batch TDS before metering—never substitute hardeners across manufacturers without DSC glass-transition (Tg) qualification. Post-Cure Schedule Adjustment Advised: ASTM D648 HDT differs by 8 °C (94 °C vs. 86 °C). For elevated-temperature tooling or dark-colored marine hulls, perform a 4–6 hour post-cure ramp at 60–80 °C (140–176 °F) to lock in full cross-link density.
4. How do US DOT 49 CFR Hazmat shipping rules and B2B drum/pack prices compare between PRO-SET INF-114 High-Tg Carbon Infusion Epoxy and PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy?▼
Identical Hazmat Logistics Profile: Both SKUs ship under US DOT 49 CFR & Transport Canada TDG as Class 9 Environmentally Hazardous (UN Number: UN3082). Note 49 CFR § 177.848 segregation if ordering with Class 5.2 Organic Peroxides (UN3105). In US B2B distribution, PRO-SET INF-114 High-Tg Carbon Infusion Epoxy is priced at $3,300 per 200 kg Drum Kit ($16.5/kg) vs. $3,180 per 200 kg Drum Kit ($15.9/kg) for PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy (delta: +0.6 USD/kg).
Related Drop-In Comparisons in Carbon Fiber Fabrics (3K / 6K / 12K), Spread-Tow & Prepregs
PRO-SET INF-114 High-Tg Carbon Infusion Epoxy (Gougeon Brothers (PRO-SET)) and PRO-SET LAM-135 Low-Viscosity Wet-Out Epoxy (Gougeon Brothers (PRO-SET)) are trademarks of their respective owners. CompositeMatrix Technologies Inc. is an independent North American B2B composite material intelligence registry; comparative ASTM D638, D648, D790, D2583, and D2196 figures are presented under the US legal doctrine of Nominative Fair Use (Lanham Act, 15 U.S.C. § 1125) and Feist Publications, Inc. v. Rural Telephone Service Co. (499 U.S. 340) for scientific and industrial cross-reference. Cure schedules, exotherm behavior, and laminate qualification must be verified by a licensed Naval Architect or Professional Engineer (PE) against current manufacturer batch Technical Data Sheets (TDS) and Safety Data Sheets (SDS).